The production of soluble microbial products (SMPs) and colloids in a submerged anaerobic membrane bioreactor (SAMBR) under different feed pHs (pH 5 and pH 11) was evaluated, and they were found to have a significant effect on SAMBR performance. Fluctuations in pH inside the SAMBR affected cell metabolism and/or enhanced cell lysis in the reactor, but the system recovered within 24 h for the pH 5 shock, and 8 h for the pH 11 shock. Carbohydrates (30 k-200 kDa) were found at very high concentrations with the pH 5 shock, while higher concentrations of "protein-like" compounds (1500 kDa-0.2 mu m) were found with the pH 11 shock. The pH shocks affected membrane fouling primarily through increased colloids, which formed a charged concentration polarization layer on the membrane surface. Larger colloids (15 mu m) related to "protein-like" compounds caused more membrane fouling than smaller ones. Alkanes, alkenes, esters, alcohols, phenols, nitrogen-compounds and sulfur compounds were the major groups of compounds identified in the effluent and supernatant samples. The membrane-fouling layer ("dynamic membrane") is an important factor in the removal of low MW compounds in the SAMBR, and changes in pH inside the SAMBR had a significant effect on effluent quality. (C) 2017 Elsevier B.V. All rights reserved.