This paper presents an analytical investigation of thermal transport due to a steady, laminar, axisymmetric liquid jet impinging normally on a superhydrophobic (SHPo) surface maintained at constant surface temperature. At the liquid-surface boundary of the spreading thin film, an isotropic hydrodynamic slip and temperature jump are imposed to approximate the SHPo surface boundary condition. Applying an integral analysis within the thin film results in a system of differential equations which are solved numerically to obtain local hydrodynamic and thermal boundary layer thicknesses, thin film height, and local and radially averaged heat flux. The classical smooth hydrophobic scenario with no-slip and no-temperature jump showed excellent agreement with previous differential analysis of the same problem. The influence of varying temperature jump length on the local Nusselt number was obtained over a range of Reynolds and Prandtl numbers. Increasing temperature jump length results in a dramatic decrease in the local thermal transport near the impingement point. The greatest decrease occurs at small temperature jump lengths. Further, local and average Nusselt numbers are less influenced by the Reynolds and Prandtl numbers as temperature jump length increases. Overall, variations in the temperature jump length exert much more influence than variations in the hydrodynamic slip length. (C) 2017 Elsevier Ltd. All rights reserved.