In this paper, we present a new alternative for improving both the performance of photovoltaic (PV) systems and the efficiency of the energy conversion by using different configuration of power converters. For this purpose, a comparative study between two configurations is carried out. The first configuration consists of a classical PV generator with a single centralized high power converter and the second one concerns a distributed topology. For this latter we use a certain number of PV strings with low power converters attached in series, in parallel or in a combination of series and parallel. Obviously the string topology has some advantages. Each power converter can control the power conversion of each module individually, which results in increased overall energy conversion of the entire system. The MPPT control system in this case can react effectively to atmospheric variations, to shading effect and to changes in the load. The PV system still operates even in case of failure on one of the power converters in a string. We simulated and compared the different conversion configurations in order to find the best one in terms of efficiency and produced energy. The obtained results are very interesting and can lead to optimal sizing and selection of best PV topology for a given application. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.