- Previous Article
- Next Article
- Table of Contents
Journal of Colloid and Interface Science, Vol.500, 349-357, 2017
Cage and linear structured polysiloxane/epoxy hybrids for coatings: Surface property and film permeability
Three polysiloxane/epoxy hybrids obtained by evolving cage- or linear-structured polysiloxane into poly glycidyl methacrylate (PGMA) matrix are compared used as coatings. One is the cage-structured hybrid of P(GMA/MA-POSS) copolymer obtained by GMA and methacrylisobutyl polyhedral oligomeric silsesquioxane (MA-POSS) via free radical polymerization, the other two are PGMA/NH2-POSS and PGMA/NH2-PDMS hybrids by cage-structured aminopropyilsobutyl POSS (NH2-POSS) or linear-structured diamino terminated poly(dimethylsiloxane) (NH2-PDMS) to cure PGMA. The effect of MA-POSS, NH2-POSS and NH2PDMS on polysiloxane/epoxy hybrid films is characterized according to their surface morphology, transparency, permeability, adhesive strength and thermo-mechanical properties. Due to caged POSS tending to agglomerate onto the film surface, P(GMA/MA-POSS) and PGMA/NH2-POSS films exhibit much more heterogeneous surfaces than PGMA/NH2-PDMS film, but the well-compatibility between epoxy matrix and MA-POSS has provided P(GMA/MA-POSS) film with much higher transmittance (98%) than PGMA/NH2-POSS film (24%), PGMA/NH2-PDMS film (27%) and traditional epoxy resin film (5%). The introduction of polysiloxane into epoxy matrix is confirmed to create hybrids with strong adhesive strength (5261113 N) and high thermos-stability (Tg = 262-282 degrees C), especially the cage-structured P(GMA/MA-POSS) hybrid (1113 N and 282 degrees C), but the flexible PDMS improves PGMA/NH2-PDMS hybrid with much higher storage modulus (519 MPa) than PGMA/NH2-POSS (271 MPa), which suggests that PDMS is advantage in improving the film stiffness than POSS cages. However, cage-structured P(GMA/MA-POSS) and PGMA/NH2-POSS indicate higher permeability than PGMA/NH2-PDMS and traditional epoxy resin. Comparatively, the cage-structured P(GMA/MA-POSS) hybrid is the best coating in transparency, permeability, adhesive strength and thermostability, but linear-structured PGMA/NH2-PDMS hybrid behaviors the best coating in mechanical property. (C) 2017 Elsevier Inc. All rights reserved.
Keywords:Polysiloxane/epoxy hybrids;Transparency;Adhesive strength;Thermo-mechanical properties;Permeability