화학공학소재연구정보센터
Journal of the Electrochemical Society, Vol.164, No.9, D621-D625, 2017
Electrodeposition of Lead-Cobalt Anodes: The Effect of Electrolyte pH on Film Properties
Electrodeposited lead (Pb)-cobalt (Co) coatings are an effective electrocatalyst in the oxygen- evolution reaction. We studied the effect of an electrolytic bath pH on the electrodeposition of Pb- Co coatings, and the coating properties were analyzed. The pH was varied from 1 to 6 for a solution without and with ascorbic acid as complexing agent. Cathodic polarization curves show that the deposition conditions have a greater effect on the reduction potential of Co2+ than the reduction potential of Pb2+. Energy-dispersive X-ray spectrometer analysis shows that a pH higher than 4 promotes Co deposition and yields a [Pb]/[Co] film ratio lower than 1. Scanning electron micrographs showed that samples grown at a pH higher than 2 were covered with Co dendrites, and that the sample grown with ascorbic acid at pH 1 exhibited a compact morphology. Anodic polarization curves showed that Pb-Co-coated anodes grown at pH 1 with a complexing agent evolved oxygen at c.a. 1.6 V vs. normal hydrogen electrode, which lead to a 40% reduction in the required overpotential (eta) for the oxygen-evolution reaction compared with conventional Pb-Ca-Sn anodes. (C) 2017 The Electrochemical Society. All rights reserved.