화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Macromolecular Research, Vol.25, No.11, 1076-1084, November, 2017
DOI10.1007/s13233-017-5146-1  Export Citation
Transparent fluorinated poly(imide siloxane) copolymers with good adhesivity
Linshuang Li, Yong Xu†, Jianfei Che, Xu Su, Chaoran Song, and Xiuping Ma
  • School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, P. R. China
E-mail:
A series of fluorinated poly(imide siloxane) (PIS) copolymers were prepared with fluorine dianhydride 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and two kinds of functional diamine, 2,2'-bis(trifluoromethyl)-[ 1,1'-biphenyl]-4,4'-diamine (TFMB) and 1,3-bis(3-aminopropyl) tetramethyldisiloxane (GAPD) via a conventional two-stage process with thermal imidization. The soft and hard segments in the copolymer chain were composed of 6FDA-GAPD and 6FDA-TFMB, respectively. The structure of the resulting copolymers was determined by Fourier transform infrared (FT-IR) and 1H nuclear magnetic resonance (1H NMR) spectroscopy. Optical, adhesion, mechanical, and thermal properties of these PIS copolymers have been evaluated with respect to real siloxane loading kept to 0, 1.4, 2.6, 4.1, and 5.5 wt% in the copolymers, which is lower than the theoretical content of siloxane loading due to a disproportionation reaction of the siloxane chain. The resulting PIS copolymers showed excellent optical transparency in the UV-visible range and good adhesion property. The cutoff absorption wavelength (λ0) of the resulting PIS copolymers films was less than 345 nm and the maximum transmittance (λmax) was up to 91%. The introduction of siloxane segment dramatically improved the adhesion property of PIS copolymers from 1.29 to 2.26 MPa (measured by means of shear strength) compared to the fluorinated homopolyimide (6FDA-TFMB) synthesized without siloxane moiety. The thermal and mechanical properties of the resulting PIS copolymers decreased slightly with the increase in siloxane loading but still remain a good level. Due to the addition of trifluoromethyl (-CF3) group and siloxane moiety, the solubility of PIS films was greatly enhanced and they were able to be dissolved in polar aprotic solvents, such as DMAC, DMF, and NMP. The contact angle, surface energy and water absorption were also studied in order to discuss their hydrophobic property.
Keywords:poly(imide siloxane);adhesion property;optical transparence
  1. Mathews AS, Kim I, Ha CS, Macromol. Res., 15(2), 114 (2007)
  2. Q. Zhang, Y. Xu, Y. Yang, L. Li, C. Song, and X. Su, J. Polym. Eng., doi:https://doi.org/10.1515/polyeng-2016-0273.
  3. Xu Y, Zhao A, Wang X, Xue H, Liu F, J. Wuhan Univ. Technol., Mater. Sci. Ed., 31, 1137 (2016)
  4. Yang CP, Su YY, Wen SJ, Hsiao SH, Polymer, 47(20), 7021 (2006)
  5. Yu HC, Kumar SV, Lee JH, Oh SY, Chung CM, Macromol. Res., 23(6), 566 (2015)
  6. Tapaswi PK, Choi MC, Jung YS, Cho HJ, Seo DJ, Ha CS, J. Polym. Sci. A: Polym. Chem., 52(16), 2316 (2014)
  7. Guo Y, Shen D, Ni H, Liu J, Yang S, Prog. Org. Coat., 76, 768 (2013)
  8. Tao LM, Yang HX, Liu JG, Fan L, Yang SY, Polymer, 50(25), 6009 (2009)
  9. Jin HS, Chang JH, Kim JC, Macromol. Res., 16(6), 503 (2008)
  10. Behniafar H, Sefid-girandehi N, J. Fluor. Chem., 132, 878 (2011)
  11. Ghaemy M, Berenjestanaki FR, Bazzar M, Des. Monomers Polym., 17, 101 (2014)
  12. Wang CY, Chen WT, Chen YY, Zhao XY, Li J, Ren Q, Mater. Chem. Phys., 143(2), 773 (2014)
  13. Tong H, Hu CC, Yang SY, Ma YP, Guo HX, Fan L, Polymer, 69, 138 (2015)
  14. Hsiao SH, Guo W, Chung C, Chen W, Eur. Polym. J., 46, 1878 (2010)
  15. Morita M, Kuwahara Y, Goto M, J. Mater. Sci. Mater. Electron., 22, 531 (2011)
  16. Tsai MH, Chiang PC, Whang WT, Ko CJ, Huang S, Surf. Coat. Technol., 200, 3297 (2005)
  17. Ku CK, Ho CH, Chen TS, Lee YD, J. Appl. Polym. Sci., 104(4), 2561 (2007)
  18. Pei XL, Chen GF, Liu JT, Fang XZ, Polymer, 56, 229 (2015)
  19. Oktay B, Toker RD, Kayaman-Apohan N, Polym. Bull., 72(11), 2831 (2015)
  20. Damaceanu MD, Musteata VE, Cristea M, Bruma M, Eur. Polym. J., 46, 1049 (2010)
  21. Novak I, Suysel P, Zemek J, Spirkova M, Velic D, Aranyosiova M, Florian S, Pollak V, Kleinova A, Lednicky F, Janigova I, Eur. Polym. J., 45, 57 (2009)
  22. Ghosh A, Banerjee S, Komber H, Schneider K, Haußler L, Voit B, Eur. Polym. J., 45, 1561 (2009)
  23. Ghosh A, Banerjee S, Haußler L, Voit B, J. Macromol. Sci.-Pure Appl. Chem., 47, 671 (2010)
  24. Othman MBH, Ramli MR, Tyng LY, Ahmad Z, Akil HM, Mater. Des., 32, 3173 (2011)
  25. Krea M, Roizard D, Moulai-Mostefa N, Polym. Int., 62, 1413 (2013)
  26. Ghosh A, Banerjee S, Polym. Adv. Technol., 19, 1486 (2008)
  27. Damaceanu MD, Constantin CP, Nicolescu A, Bruma M, Belomonia N, Begunov RS, Eur. Polym. J., 50, 200 (2014)
  28. Yan S, Chen W, Yan W, Huang M, Chen C, Xu Z, Yeung KWK, Yi C, Des. Monomers Polym., 14, 579 (2011)
  29. Zhang E, Chen H, Dai X, Liu X, Yang W, Liu W, Dong Z, Qiu X, Ji X, J. Polym. Res., 24, 47 (2017)
  30. Ghosh A, Banerjee S, J. Appl. Polym. Sci., 109(4), 2329 (2008)
  31. Ghosh A, Banerjee S, J. Appl. Polym. Sci., 107(3), 1831 (2008)
  32. Sun W, Gu J, Tian L, Yao P, Zhang Q, J. Polym. Res., 22, 1 (2015)
  33. Furuzono T, Seki K, Kishida A, Ohshige TA, Waki K, Maruyama I, Akashi M, J. Appl. Polym. Sci., 59(7), 1059 (1996)
  34. Chen X, Gardella JA, Ho T, Wynne KJ, Macromolecules, 28(5), 1635 (1995)
  35. Zhu ZK, Yang Y, Yin J, Wang XY, Ke YC, Qi ZN, J. Appl. Polym. Sci., 73(11), 2063 (1999)
  36. Jang W, Shin D, Choi S, Park S, Han H, Polymer, 48(7), 2130 (2007)
  37. Wu J, Chen W, Liou GS, Polym. Chem., 7, 1569 (2016)
  38. Kiyotsukuri T, Tsutsumi N, Ayama K, J. Polym. Sci. A: Polym. Chem., 26, 807 (1988)
  39. Jiang X, Gu JA, Shen Y, Wang SG, Tian XZ, Desalination, 265(1-3), 74 (2011)
  40. Zhai L, Yang SY, Fan L, Polymer, 53(16), 3529 (2012)