Development of phosphonated alginate derivatives as coating material on titanium surface for medical application

Seung Hyun Noh; Eun Hye Kim; Ga Dug Han; Jae Won Kim; Yoshihiro Ito; Jae-Gwan Lee; Tae Il Son

Macromolecular Research, Vol.25, No.12, 1192-1198, December, 2017

DOI10.1007/s13233-017-5165-y Export Citation

Development of phosphonated alginate derivatives as coating material on titanium surface for medical application

Seung Hyun Noh¹, Eun Hye Kim¹, Ga Dug Han¹, Jae Won Kim¹, Yoshihiro Ito^{2, 3}, Jae-Gwan Lee¹, and Tae Il Son^{1, †}

¹Department of Systems Biotechnology and Bio-Environmental Technology (BET) Research Institute, Chung-Ang University, Anseong, Gyeonggi 17546, Korea
²Nano Medical Engineering Laboratory, RIKEN Advanced Science Institute, 2-1 Hirosawa, Wako-shi, Saitama 351-0198, Japan
³Department of Computational Intelligence and Systems Science, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology, 4259 Nagatsuta-cho, Midori-ku, Yokohama, 226-8501, Japan

E-mail:

Alginate derivative was prepared to be coated on titanium surface for improving osseointegration. It was modified by reaction of alginate and 3-aminopropylphosphonic acid. The phosphonate group of P-alginate was identified by 31P NMR. There was a specific peak derived from phosphonate group at about 24 ppm form external standard. X-Ray photoelectron spectroscopy (XPS) and water contact angle measurement were carried out for characterization of titanium surface treated with P-alginate. To confirm toxicity, cytotoxicity test was performed. Cell-adhesion test was demonstrated to improve cell adhesion on titanium surface.

Keywords:coating titanium surface;phosphonated alginate;osseointegration;biocompatibility

[References]

Hayakawa S, Masuda Y, Okamoto K, Shirosaki Y, Kato K, Osaka A, J. Mater. Sci. -Mater. Med., 25, 375 (2014)
Mohseni E, Zalnezhad E, Bushroa AR, Int. J. Adhes. Adhes., 48, 238 (2014)
Zitter H, Plenk H, J. Biomed. Mater. Res., 21, 881 (1987)
Gu_ehennec LL, Soueidan A, Layrolle P, Amouriq Y, Dent. Mater., 23, 844 (2007)
Calvo-Guirado JL, Satorres M, Negri B, Ramirez-Fernandez P, Mate-Sanchez de Val JE, Delgado-Ruiz R, Gomez-Moreno G, Abboud M, Romanos GE, Clin. Oral Investig., 19, 1699 (2015)
Albrektsson T, Wennerberg A, Int. J. Prosthodont., 17, 536 (2004)
Van Vlierberghe S, Vanderleyden E, Boterberg V, Dubruel P, Polymer, 3, 114 (2011)
Dubruel P, Vanderleyden E, Bergada M, De Paepe I, Chen H, Kuypers S, Luyten J, Schrooten J, Van L, Schacht E, Surf. Sci., 600, 2562 (2006)
Albrektsson T, Wennerberg A, Int. J. Prosthodont., 17, 544 (2004)
Murgatroyd AA, Wenhai W, Klocke N, Cunningham BW, Spine J, 16, S252 (2016)
Khan A, Al Kheraif AA, Alhijji M, Matinlinna JP, Int. J. Adhes. Adhes., 65, 41 (2016)
Medvedev AE, Ng HP, Lapovoka R, Estrin Y, Anumalasetty VN, J. Mech. Behav. Biomed. Mater., 57, 55 (2016)
Balasundaram T, Raja K, J. Sci. Ind. Res., 75, 315 (2016)
Osborn JF, in Dental Implants: Materials and Systems, Carl Hanser, Munich, 1980, p 111.
Zoulalian V, Monge S, Zurcher S, Textor M, Robin JJ, Tosatti S, J. Phys. Chem. B, 110.51, 25603 (2006)
Lu X, Zhao Z, Leng Y, Mater. Sci. Eng. C-Biomimetic Supramol. Syst., 27, 700 (2007)
Nasiri-Tabrizi B, Fahami A, J. Ind. Eng. Chem., 20(4), 1236 (2014)
Lee H, Scherer NF, Messersmith PB, Proc. Natl. Acad. Sci. U.S.A., 103, 12999 (2006)
Golub M, Lott D, Watkins E, Garamus V, Luthringer B, Stoermer M, Schreyer A, Willumeit R, Biointerphases, 8, 21 (2013)
Amalric J, Mutin PH, Guerrero G, Ponche A, Sotto A, Lavigne JP, J. Mater. Chem., 19, 141 (2009)
Tilmaciu CM, Mathieu M, Lavigne JP, Toupet K, Guerrero G, Ponche A, Amalric J, Noel D, Mutin PH, Acta Biomater., 15, 266 (2015)
Lee H, Rho J, Messersmith PB, Adv. Mater., 21(4), 431 (2009)
Bae IH, Park IK, Park D, Lee H, Jeong M, J. Mater. Sci. -Mater. Med., 23, 1259 (2012)
Park SH, Zhu L, Tada S, Obuse S, Yoshida Y, Nakamura M, Son TI, Tsuneda S, Ito Y, Polym. Int., 63, 1616 (2014)
Lee HJ, Park SH, Seo SY, Cho YM, Woo HD, Ito Y, Son TI, Macromol. Res., 21(2), 216 (2013)
Park SH, Seo SY, Na HN, Kim KI, Lee JW, Woo HD, Lee JH, Seok HK, Lee JG, Chung SI, Chung K, Han D, Ito Y, Jang EC, Son TI, Macromol. Res., 19, 921 (2013)
Heo Y, Lee HJ, Kim EH, Kim MK, Ito Y, Son TI, J. Appl. Polym. Sci., 131, 40113 (2014)
Seo SY, Park SH, Lee HJ, Heo Y, Na HN, Kim KI, Han JH, Ito Y, Son TI, J. Appl. Polym. Sci., 128(6), 4322 (2013)
Cho YM, Lee HJ, Heo Y, Park SH, Seo SY, Han JH, Son TI, J. Appl. Polym. Sci., 129(4), 2161 (2013)
Thomas S, J. Wound Care, 9, 56 (2000)
Boyd A, Chakrabarty AM, J. Ind. Microbiol. Biotechnol., 15, 162 (1995)
Kim EH, Park SH, Chi SY, Woo HD, Heo Y, Ito Y, Han DK, Nah JW, Son TI, Macromol. Res., 24(2), 99 (2016)
Jeong JH, Kim EH, Han GD, Nah JW, Ito Y, Son TI, J. Ind. Eng. Chem., 34, 33 (2016)
Heo Y, Kim EH, Kobatake E, Nah JW, Ito Y, Son TI, J. Ind. Eng. Chem., 36, 66 (2016)
Buser D, Broggini N, Wieland M, Schenk R, Denzer A, Cochran D, Hoffmann B, Lussi A, Steinemann S, J. Dent. Res., 83, 529 (2004)
Zhao G, Schwartz Z, Wieland M, Rupp F, Geis-Gerstorfer J, Cochran D, Boyan B, J. Biomed. Mater. Res., 74, 49 (2005)
Bang SM, Moon HJ, Kwon YD, Yoo JY, Pae A, Kwon IK, Clin. Oral Implants Res., 25, 831 (2014)
Gulati K, Ramakrishnan S, Aw MS, Atkins GJ, Findlay DM, Losic D, Acta Biomater., 8, 449 (2012)
Kazemzadeh-Narbat M, Lai BFL, Ding C, Kizhakkedathu JN, Hancock REW, Wang R, Biomaterials, 34, 5969 (2013)
Goodman SB, Yao Z, Keeney M, Yang F, Biomaterials, 34, 3174 (2013)

[Referenced By]

[1] Hayakawa S, Masuda Y, Okamoto K, Shirosaki Y, Kato K, Osaka A, J. Mater. Sci. -Mater. Med., 25, 375 (2014)

[2] Mohseni E, Zalnezhad E, Bushroa AR, Int. J. Adhes. Adhes., 48, 238 (2014)

[3] Zitter H, Plenk H, J. Biomed. Mater. Res., 21, 881 (1987)

[4] Gu_ehennec LL, Soueidan A, Layrolle P, Amouriq Y, Dent. Mater., 23, 844 (2007)

[5] Calvo-Guirado JL, Satorres M, Negri B, Ramirez-Fernandez P, Mate-Sanchez de Val JE, Delgado-Ruiz R, Gomez-Moreno G, Abboud M, Romanos GE, Clin. Oral Investig., 19, 1699 (2015)

[6] Albrektsson T, Wennerberg A, Int. J. Prosthodont., 17, 536 (2004)

[7] Van Vlierberghe S, Vanderleyden E, Boterberg V, Dubruel P, Polymer, 3, 114 (2011)

[8] Dubruel P, Vanderleyden E, Bergada M, De Paepe I, Chen H, Kuypers S, Luyten J, Schrooten J, Van L, Schacht E, Surf. Sci., 600, 2562 (2006)

[9] Albrektsson T, Wennerberg A, Int. J. Prosthodont., 17, 544 (2004)

[10] Murgatroyd AA, Wenhai W, Klocke N, Cunningham BW, Spine J, 16, S252 (2016)

[11] Khan A, Al Kheraif AA, Alhijji M, Matinlinna JP, Int. J. Adhes. Adhes., 65, 41 (2016)

[12] Medvedev AE, Ng HP, Lapovoka R, Estrin Y, Anumalasetty VN, J. Mech. Behav. Biomed. Mater., 57, 55 (2016)

[13] Balasundaram T, Raja K, J. Sci. Ind. Res., 75, 315 (2016)

[14] Osborn JF, in Dental Implants: Materials and Systems, Carl Hanser, Munich, 1980, p 111.

[15] Zoulalian V, Monge S, Zurcher S, Textor M, Robin JJ, Tosatti S, J. Phys. Chem. B, 110.51, 25603 (2006)

[16] Lu X, Zhao Z, Leng Y, Mater. Sci. Eng. C-Biomimetic Supramol. Syst., 27, 700 (2007)

[17] Nasiri-Tabrizi B, Fahami A, J. Ind. Eng. Chem., 20(4), 1236 (2014)

[18] Lee H, Scherer NF, Messersmith PB, Proc. Natl. Acad. Sci. U.S.A., 103, 12999 (2006)

[19] Golub M, Lott D, Watkins E, Garamus V, Luthringer B, Stoermer M, Schreyer A, Willumeit R, Biointerphases, 8, 21 (2013)

[20] Amalric J, Mutin PH, Guerrero G, Ponche A, Sotto A, Lavigne JP, J. Mater. Chem., 19, 141 (2009)

[21] Tilmaciu CM, Mathieu M, Lavigne JP, Toupet K, Guerrero G, Ponche A, Amalric J, Noel D, Mutin PH, Acta Biomater., 15, 266 (2015)

[22] Lee H, Rho J, Messersmith PB, Adv. Mater., 21(4), 431 (2009)

[23] Bae IH, Park IK, Park D, Lee H, Jeong M, J. Mater. Sci. -Mater. Med., 23, 1259 (2012)

[24] Park SH, Zhu L, Tada S, Obuse S, Yoshida Y, Nakamura M, Son TI, Tsuneda S, Ito Y, Polym. Int., 63, 1616 (2014)

[25] Lee HJ, Park SH, Seo SY, Cho YM, Woo HD, Ito Y, Son TI, Macromol. Res., 21(2), 216 (2013)

[26] Park SH, Seo SY, Na HN, Kim KI, Lee JW, Woo HD, Lee JH, Seok HK, Lee JG, Chung SI, Chung K, Han D, Ito Y, Jang EC, Son TI, Macromol. Res., 19, 921 (2013)

[27] Heo Y, Lee HJ, Kim EH, Kim MK, Ito Y, Son TI, J. Appl. Polym. Sci., 131, 40113 (2014)

[28] Seo SY, Park SH, Lee HJ, Heo Y, Na HN, Kim KI, Han JH, Ito Y, Son TI, J. Appl. Polym. Sci., 128(6), 4322 (2013)

[29] Cho YM, Lee HJ, Heo Y, Park SH, Seo SY, Han JH, Son TI, J. Appl. Polym. Sci., 129(4), 2161 (2013)

[30] Thomas S, J. Wound Care, 9, 56 (2000)

[31] Boyd A, Chakrabarty AM, J. Ind. Microbiol. Biotechnol., 15, 162 (1995)

[32] Kim EH, Park SH, Chi SY, Woo HD, Heo Y, Ito Y, Han DK, Nah JW, Son TI, Macromol. Res., 24(2), 99 (2016)

[33] Jeong JH, Kim EH, Han GD, Nah JW, Ito Y, Son TI, J. Ind. Eng. Chem., 34, 33 (2016)

[34] Heo Y, Kim EH, Kobatake E, Nah JW, Ito Y, Son TI, J. Ind. Eng. Chem., 36, 66 (2016)

[35] Buser D, Broggini N, Wieland M, Schenk R, Denzer A, Cochran D, Hoffmann B, Lussi A, Steinemann S, J. Dent. Res., 83, 529 (2004)

[36] Zhao G, Schwartz Z, Wieland M, Rupp F, Geis-Gerstorfer J, Cochran D, Boyan B, J. Biomed. Mater. Res., 74, 49 (2005)

[37] Bang SM, Moon HJ, Kwon YD, Yoo JY, Pae A, Kwon IK, Clin. Oral Implants Res., 25, 831 (2014)

[38] Gulati K, Ramakrishnan S, Aw MS, Atkins GJ, Findlay DM, Losic D, Acta Biomater., 8, 449 (2012)

[39] Kazemzadeh-Narbat M, Lai BFL, Ding C, Kizhakkedathu JN, Hancock REW, Wang R, Biomaterials, 34, 5969 (2013)

[40] Goodman SB, Yao Z, Keeney M, Yang F, Biomaterials, 34, 3174 (2013)