화학공학소재연구정보센터
Polymer(Korea), Vol.42, No.2, 311-319, March, 2018
열유도 상분리/비용매유도 상분리 혼합 공정에 의한 PVDF 중공사막 제조에서 응고액의 영향
Effects of Coagulant on Fabrication of PVDF Hollow Fiber Membranes via TIPS/NIPS Combination Process
E-mail:
초록
고분자/희석제/용매 시스템에서 열유도 상분리(TIPS)/비용매유도 상분리(NIPS) 혼합공정으로 poly(vinylidene fluoride)(PVDF) 막을 제조하였다. Water, glycerol, ethanol 등 다양한 비용매를 내부 응고액으로 사용하였다. 또한 비용매에 용매인 N-methyl-2-pyrrolidone(NMP)나 희석제인 dibutyl phthalate(DBP)를 첨가하여 상 분리 속도 및 dope 용액과의 친화도를 조절하였다. 내부 응고액에 따른 상분리 거동의 변화가 표면구조 및 물성에 영향을 미치는 것을 확인하였다. 광학현미경을 이용하여 계면에서의 상분리 거동을 실시간으로 확인하였고 그 결과를 실제 평막 형태로 제조된 막의 구조와 비교하였다. 용융방사 장치를 사용하여 실제 중공사막을 제조하였고 내부 응고액의 변화에 따른 중공사막 내부 표면구조의 변화를 확인하였고 기계적 강도 및 제거율을 유지하면서 투과도가 향상됨을 확인하였다.
Poly(vinylidene fluoride) (PVDF) membranes were prepared via hybrid process of the thermally induced phase separation (TIPS) and the non-solvent induced phase separation (NIPS) from the dope solution system of polymer/diluent/ solvent. Various coagulants were tested such as water, glycerol, ethanol. N-methyl-2-pyrrolidone (NMP) or dibutyl phthalate (DBP) was added to nonsolvent as a solvent or a diluent, respectively, to control the phase separation rate and affinity with dope solution. It was examined that changes of phase separation behavior induced by coagulants affected the surface structure and properties of the membranes. Real time phase separation mechanism studies were conducted by using optical microscope system and were compared with the structures of the flat sheet membranes. Hollow fiber membranes were prepared by using a melt spinning apparatus, and it was confirmed that change of inner coagulant affected the inner surface structure of the hollow fiber membranes. It was proved that permeation characteristics were enhanced while maintaining the mechnical strength and rejection performance.
  1. Yeow ML, Liu YT, Li K, J. Appl. Polym. Sci., 92(3), 1782 (2004)
  2. Kim SS, Lloyd DR, J. Membr. Sci., 64, 13 (1991)
  3. Caneba GT, Soong DS, Macromolecules, 18, 2538 (1985)
  4. Matsuyama H, Takida Y, Maki T, Teramoto M, Polymer, 43(19), 5243 (2002)
  5. Li XF, Xu GQ, Lu XL, Xiao CF, J. Appl. Polym. Sci., 107(6), 3630 (2008)
  6. Xu HP, Lang WZ, Zhang X, Guo YJ, J. Ind. Eng. Chem., 21, 1005 (2015)
  7. Li XF, Wang YG, Lu XL, Xiao CF, J. Membr. Sci., 320(1-2), 477 (2008)
  8. Jin TT, Zhao ZP, Chen KC, J. Appl. Polym. Sci., 133, 42953 (2016)
  9. Kim JF, Kim JH, Lee YM, Drioli E, AIChE J., 62(2), 461 (2016)
  10. Lee S, Kim SS, Korean Chem. Eng. Res., 54(1), 57 (2016)
  11. Im DJ, Kim SS, Polym. Korea, 39(5), 697 (2015)
  12. Sukitpaneenit P, Chung TS, J. Membr. Sci., 340(1-2), 192 (2009)
  13. Shi L, Wang R, Cao YM, Liang DT, Tay JH, J. Membr. Sci., 315(1-2), 195 (2008)
  14. Bakeri G, Ismail AF, Rahimnejad M, Matsuura T, Rana D, Sep. Purif. Technol., 98, 262 (2012)
  15. Wang L, Huang DX, Wang XD, Meng XR, Lv YT, Wang X, Miao R, Desalination, 361, 25 (2015)
  16. Jang H, Song DH, Lee HJ, Lim SH, Kim IC, Kwon YN, J. Appl. Polym. Sci., 132, 42715 (2015)
  17. Akbari A, Hamadanian M, Jabbari V, Lehi AY, Bojaran M, Desalin. Water Treat., 46, 96 (2012)
  18. Zhang MG, Nguyen QT, Ping ZH, J. Membr. Sci., 327(1-2), 78 (2009)
  19. Rahbari-Sisakht M, Ismail AF, Matsuura T, Sep. Purif. Methods, 88, 99 (2012)
  20. Peng N, Widjojo N, Sukitpaneenit P, Teoh MM, Lipscomb GG, Chung TS, Lai JY, Prog. Polym. Sci, 37, 1401 (2012)
  21. Simone S, Figoli A, Criscuoli A, Carnevale MC, Alfadul SM, Al-Romaih HS, Al Shabouna FS, Al-Harbi OA, Drioli E, Desalination, 344, 28 (2014)
  22. Rozelle LT, Cadotte JE, Corneliussen RD, Erickson EE, Cobian KE, Kopp CV, Encyclopedia of Separation Science, M. Mulder, Editor, Academic Press, N. Y., p 3331-3346 (2000).
  23. Cui ZY, Du CH, Xu YY, Ji GL, Zhu BK, J. Appl. Polym. Sci., 108(1), 272 (2008)
  24. Cha BJ, Yang JM, J. Membr. Sci., 291(1-2), 191 (2007)