다층 코팅된 Stainless Steel의 고온 내삭마특성

최광수; 양원철; 김영주; 박준식; 김민규; Kwangsu Choi; Wonchul Yang; Yeong joo Kim; Joon Sik Park; Min Kyu Kim

Korean Journal of Materials Research, Vol.28, No.3, 135-141, March, 2018

DOI10.3740/MRSK.2018.28.3.135 Export Citation

다층 코팅된 Stainless Steel의 고온 내삭마특성

High Temperature Ablation Behaviors of Multilayer Coated Stainless Steel

최광수, 양원철, 김영주, 박준식^†, 김민규^†

한밭대학교 신소재공학과

Kwangsu Choi, Wonchul Yang, Yeong joo Kim, Joon Sik Park^†, and Min Kyu Kim^†

Department of Materials Science and Engineering, Hanbat National University, Daejeon 34158, Republic of Korea

E-mail:,

Stainless steel is being used in various industries such as automobile and aerospace for its cheap manufacturing cost and excellent mechanical properties. However, stainless steel failed to stably protect a specimen with a Cr2O3 protective layer at temperatures above 1000℃. Thus, improving the high temperature flame resistance of the specimen through additional surface coating was needed. In this study, multilayer coatings of YSZ and Al2O3 were performed on SUS 304 specimens using pack cementation coatings and thermal plasma spray. The multilayer coated specimen showed enhanced thermal properties due to the coated layers. The microstructures and phase stability are discussed together with flame conditions at 1350℃.

Keywords:pack cementation coatings;thermal plasma coatings;YSZ

[References]

Perez FJ, Cristobal MJ, Hierro MP, Pedraza F, Surf. Coat. Technol., 120, 442 (1999)
Perez FJ, Hierro MP, Pedraza F, Homez C, Carpintero MC, Surf. Coat. Technol., 120, 151 (1999)
Riffard F, Buscail H, Caudron E, Cueff R, Issartel C, Perrier S, Appl. Surf. Sci., 252(10), 3697 (2006)
Sharafi S, Farhang MR, Surf. Coat. Technol., 200, 5048 (2006)
Bangaru NV, Krutenat RC, J. Vac. Sci. Technol. B,, 2, 806 (1984)
Zandrahimi M, Vatandoost J, Ebrahimifar H, J. Mater. Eng. Perform., 21, 2074 (2012)
Smith KL, Kutyan A. Abolian SA, Krenek TF, Salas SA, Ravi VA, NACE International., March, Orlando, Florida (2013).
Chen M, Li W, Shen M, Zhu S, Wang F, Corrosion Sci., 82, 316 (2014)
Gao PH, Cao ST, Li JP, Yang Z, Guo YC, J. Alloy. Compd., 684, 188 (2016)
Bernard B, Quet A, Bianchi L, Joulia A, Malie A, Schick V, Remy B, Surf. Coat. Technol., 318, 122 (2017)
Son YI, Chung CH, Gowkanapalli RR, Moon CH, Park JS, Met. Mater. Int., 21, 1 (2015)
Qiao M, Zhou C, Surf. Coat. Technol., 206, 2899 (2012)
Kothari K, Radhakrishnan R, Werely NM, Prog. Aerosp. Sci., 55, 1 (2012)
Park JS, Kim JM, Kim HY, Yi S, Perepezko JH, Met. Mater. Int., 14, 1 (2008)
Cheng J, Yi S, Park JS, Int. J. Refract. Met. Hard Mater., 41, 103 (2013)
Park JS, Kim JM, Kim HY, Lee JS, Oh IH, Kang CS, Mater. Trans., 49, 1048 (2008)
Park JS, Kim JM, Cho SH, Son YI, Kim D, Mater. Trans., 54, 1517 (2013)
Lee SY, Kim OH, Yeh B, Park CO, Korean J. Mater. Res., 5, 835 (1995)
Son YI, Park JS, Trends in Metals & Mater. Eng., 28, 10 (2015)
Parker DW, Mater. Des., 13, 345 (1992)
Ghasemi R, Vakilifard H, Ceram. Int., 43, 8556 (2017)
Loghman-Estarki MR, Razvi RS, Edris H, Pourbafrany M, Jamali H, Ghasemi R, Ceram. Int., 40, 1405 (2014)
Sokolowski P, Bjorklund S, Musalek R, Candidato RT, Pawlowski L, Nait-Al B, Smith D, Surf. Coat. Technol., 318, 28 (2017)

[1] Perez FJ, Cristobal MJ, Hierro MP, Pedraza F, Surf. Coat. Technol., 120, 442 (1999)

[2] Perez FJ, Hierro MP, Pedraza F, Homez C, Carpintero MC, Surf. Coat. Technol., 120, 151 (1999)

[3] Riffard F, Buscail H, Caudron E, Cueff R, Issartel C, Perrier S, Appl. Surf. Sci., 252(10), 3697 (2006)

[4] Sharafi S, Farhang MR, Surf. Coat. Technol., 200, 5048 (2006)

[5] Bangaru NV, Krutenat RC, J. Vac. Sci. Technol. B,, 2, 806 (1984)

[6] Zandrahimi M, Vatandoost J, Ebrahimifar H, J. Mater. Eng. Perform., 21, 2074 (2012)

[7] Smith KL, Kutyan A. Abolian SA, Krenek TF, Salas SA, Ravi VA, NACE International., March, Orlando, Florida (2013).

[8] Chen M, Li W, Shen M, Zhu S, Wang F, Corrosion Sci., 82, 316 (2014)

[9] Gao PH, Cao ST, Li JP, Yang Z, Guo YC, J. Alloy. Compd., 684, 188 (2016)

[10] Bernard B, Quet A, Bianchi L, Joulia A, Malie A, Schick V, Remy B, Surf. Coat. Technol., 318, 122 (2017)

[11] Son YI, Chung CH, Gowkanapalli RR, Moon CH, Park JS, Met. Mater. Int., 21, 1 (2015)

[12] Qiao M, Zhou C, Surf. Coat. Technol., 206, 2899 (2012)

[13] Kothari K, Radhakrishnan R, Werely NM, Prog. Aerosp. Sci., 55, 1 (2012)

[14] Park JS, Kim JM, Kim HY, Yi S, Perepezko JH, Met. Mater. Int., 14, 1 (2008)

[15] Cheng J, Yi S, Park JS, Int. J. Refract. Met. Hard Mater., 41, 103 (2013)

[16] Park JS, Kim JM, Kim HY, Lee JS, Oh IH, Kang CS, Mater. Trans., 49, 1048 (2008)

[17] Park JS, Kim JM, Cho SH, Son YI, Kim D, Mater. Trans., 54, 1517 (2013)

[18] Lee SY, Kim OH, Yeh B, Park CO, Korean J. Mater. Res., 5, 835 (1995)

[19] Son YI, Park JS, Trends in Metals & Mater. Eng., 28, 10 (2015)

[20] Parker DW, Mater. Des., 13, 345 (1992)

[21] Ghasemi R, Vakilifard H, Ceram. Int., 43, 8556 (2017)

[22] Loghman-Estarki MR, Razvi RS, Edris H, Pourbafrany M, Jamali H, Ghasemi R, Ceram. Int., 40, 1405 (2014)

[23] Sokolowski P, Bjorklund S, Musalek R, Candidato RT, Pawlowski L, Nait-Al B, Smith D, Surf. Coat. Technol., 318, 28 (2017)