The present paper deals with thermal analysis of cascade Active Magnetic Regenerator (AMR) cycle for the liquefaction of hydrogen starting from room temperature. For this purpose, the energy equations for fluid and solid within the regenerator bed of the AMR cycle have been considered. To solve the resulting mathematical model implicit finite difference method has been used. Thermal energy and mass balances are performed for several liquefaction systems composed of different number of cascade cycles. A simulation method using Hysys simulation commercial code has been presented. The multistage system operates with an ideal magnetic material as refrigerant and hydrogen gaseous as carrier fluid. First, the coefficient of performance (COP) of the AMR cycle and the required volume of magnetic material as functions of the number of cascades have been investigated. Then, the required volume is optimized by using the relationship between the COP and the volume. It has been found that a number of 6 AMR cycles operating in series is the optimal number of cascades required to liquefy 1 kg/h of hydrogen supplied at 25 degrees C. The system can operate between two volumes of magnetic material; namely, the minimum required volume (2.96 L) and the most efficient volume (7.44 L), corresponding to COP values of 1.23 and 4.7 respectively. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.