In this paper, we proposed and experimentally validated a vibration-based multimodal hybrid piezoelectric-electromagnetic energy harvester having multiple mechanical degrees-of-freedom. This multimodal hybrid energy harvester (MHEH) has a unique design, which helps it to achieve multiple close resonant modes of vibration in a certain frequency range. Using a low-spring-stiffness material (polyacrylate) as a substrate assists MHEH in reducing the higher resonant frequencies into a low frequency range. The two combined conversion mechanisms (piezoelectric-electromagnetic) are exploited to obtain higher output power from low input accelerations at ambient vibrations. The finite element method simulation model is employed to predict and optimize the mode shapes of the proposed MHEH for different vibration modes. The simulation and experimental result imply that the proposed MHEH can operate at four resonant modes of vibration in the range of 12-22 Hz, which are concentrated around 12, 15, 17, and 22 Hz. An MHEH prototype is fabricated, where four lead-zirconate-titanate elements are used as piezoelectric materials, and NdFeB magnets with conductive coils are used as electromagnetic parts in the same system. Here, a single piezoelectric generator can produce a maximum of 250.23 mu W of power across an optimum load of 90 K Omega at the 3rd resonant mode (17 Hz) under 0.4 g (3.92 ms(-2)) acceleration. On the other hand, a single electromagnetic generator can deliver a maximum power of 244.17 mu W to a 10 Omega optimum load under the same conditions. Meanwhile, all eight generators of the MHEH operate simultaneously at their respective resonant frequencies.