International Journal of Heat and Mass Transfer, Vol.124, 646-654, 2018
Forced convective condensation flow and heat transfer characteristics of hydrocarbon mixtures refrigerant in helically coiled tubes
Helical tube has been widely used in liquefied natural gas (LNG) liquefying applications. However, studies on the heat transfer performance of hydrocarbon mixture refrigerant in a helical tube have rarely been conducted. In this paper, condensation heat transfer characteristics of hydrocarbon mixture refrigerant in a helical tube were investigated numerically. The tests were conducted at saturation pressure of 24 MPa, mass flux of 100-400 kg/(m(2).s) and vapor quality 0-1. The numerical model was well verified by experimental data. And the effects of different structural parameters (tube diameter, helix angle and curvature diameter) and operating parameters (mass flux, heat flux and saturation pressure) on the heat transfer of hydrocarbons refrigeration were considered. The results showed that the tube diameter and mass flux had significant effect on condensation heat transfer coefficient. Meanwhile, stratified flow, half-annular flow and annular flow were observed during the condensation of methane/propane mixtures refrigerant by simulations, and a new flow pattern transition line for hydrocarbon refrigerants condensation process was proposed. Finally, the simulation results were compared with several well-known condensation heat transfer correlations. The research results will provide some constructive instructions for more effective design of LNG heat exchanger. (C) 2018 Published by Elsevier Ltd.