To fabricate effective and stable OER electrode in water electrolysis, self-doped TiO2 nanotube arrays which has a higher electrical conductivity than pristine TiO2 nanotube arrays was used as the support for loading IrO2. The self-doped TNTA was fabricated by a simple electrochemical reduction of TNTA in neutral electrolyte solution, and then IrO2 nano particles were deposited by pulse electro-deposition method. The cyclic voltammetric behavior, electrical conductivity and micro structure of self-doped TNTA prepared at different reduction potential were characterized to obtain an optimal performance, and self-doped TNTA prepared under -1.9 V (vs. Ag/AgCl) shows the best electrochemical performance. After depositing IrO2, the OER activity and stability of new electrodes were also determined. Due to the enhanced electrical conductivity of support, the mass activity of IrO2/self-doped TNTA are 50 times higher than IrO2/TNTA. The OER stability of new electrode was evaluated under constant current of 5 mA/cm(2), IrO2/TNTA and IrO2/Ti were also tested for comparison. A higher stability of IrO2/self-doped TNTA electrode is observed than the other two electrodes, and XPS studies indicate a lower oxidation state of Ir in IrO2/self-doped TNTA, this shows a possible interactions between IrO2 and the new support. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.