Journal of Hazardous Materials, Vol.354, 116-124, 2018
Using raw and sulfur-impregnated activated carbon as active cap for leaching inhibition of mercury and methylmercury from contaminated sediment
Sulfur-impregnated activated carbon (SAC) has been reported with a high affinity to Hg, but little research has done on understanding its potential as active cap for inhibition of Hg release from contaminated sediments. In this study, high-quality coconut-shell activated carbon (AC) and its derived SAC were examined and shown to have great affinity to both aqueous Hg2+ and methylmercury (MeHg). SAC had greater partitioning coefficients for Hg2+ (K-D = 9.42 x 10(4)) and MeHg (K-D = 7.661 x 10(5)) as compared to those for AC (K-D = 3.69 x 10(4) and 2.25 x 10(5), respectively). However, AC appeared to have greater inhibition in total Hg (THg) leaching from sediment (14.2-235.8 mg-Hg/kg-sediment) to porewater phase as compared to SAC. 3 wt% AC amendment in sediment (235.8 mg/kg Hg) was the optimum dosage causing the porewater THg reduction by 99.88%. Moreover, significant inhibition in both THg and MeHg releases within the 83-d trial microcosm tests was demonstrated with active caps composed of SAC + bentonite, SAC + clean sediment, and AC + bentonite. While both AC and SAC successfully reduce the porewater Hg in sediment environment, the smaller inhibition in Hg release by SAC as compared to that by raw AC may suggest that possibly formed HgS nanoparticles could be released into the porewater that elevates the porewater Hg concentration.