화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Macromolecular Research, Vol.26, No.10, 851-863, October, 2018
DOI10.1007/s13233-018-6119-8  Export Citation
The Influence of Additives on the Interfacial Bonding Mechanisms Between Natural Fibre and Biopolymer The Influence of Additives on the Interfacial Bonding Mechanisms Between Natural Fibre and Biopolymer CompositesThe Influence of Additives on the Interfacial Bonding Mechanisms Between Natural Fibre and Biopolymer Composites Composites
Seyed Hamidreza Ghaffar†, Omar Abo Madyan, Mizi Fan, and Jorge Corker1
  • College of Engineering, Design and Physical Sciences, Brunel University London, Uxbridge, Middlesex, UB8 3PH, United Kingdom, UK
  • 1Instituto Pedro Nunes, IPN Led&mat, Rua Pedro Nunes, 3030 199 Coimbra, Portugal
E-mail:
There has not been extensive research into the subjects of the interfacial bonding quality and the interaction mechanisms of biopolymers and natural fibres. Attempts have been made to incorporate natural fibres/fillers (biofibres) into the manufacture of composites in order to increase the functionality and performance of biopolymers synthesised from natural sources/microbial systems. However, the interfacial bonding quality and other substantial technical challenges still need to be addressed if their industrial use is to be realized. The interfacial bonding quality ultimately dictates the mechanical and physical performance of bio-composites. This review paper attempts to collate the state-of-the-art regarding coupling agents/additives and their roles in interaction mechanisms with biofibres and biopolymers. Two potential pathways for narrowing the performance gap between biopolymer-based bio-composites and their petroleum-based counterparts are: i) improving the interfacial bonding quality by the synthesis of a specific coupling agent, and ii) improving the processability of bio-composites by blending two or more biopolymers.
Keywords:interfacial bonding;biopolymers;bio-composites;coupling agents;additives
  1. Bodros E, Pillin I, Montrelay N, Baley C, Compos. Sci. Technol., 67, 462 (2007)
  2. Imre B, Pukanszky B, Eur. Polym. J., 49, 1215 (2013)
  3. Le Duigou A, Davies P, Baley C, Compos. Sci. Technol., 70, 231 (2010)
  4. Mohanty AK, Misra M, Hinrichsen G, Macromol. Mater. Eng., 276-277, 1 (2000)
  5. Luckachan GE, Pillai CKS, J. Polym. Environ., 19, 637 (2011)
  6. Jamshidian M, Tehrany EA, Imran M, Jacquot M, Desobry S, Compr. Rev. Food. Sci. Food. Saf., 9, 552 (2010)
  7. Sangeetha VH, Dek H, Varghese TO, Nayak SK, Polym. Compos., 39, 81 (2018)
  8. Colombo B, Sciarria TP, Reis M, Scaglia B, Adani F, Bioresour. Technol., 218, 692 (2016)
  9. Arrieta MP, Lopez J, Ferrandiz S, Peltzer MA, Polym. Test, 32, 760 (2013)
  10. Shin BY, Jang SH, Kim BS, Polym. Eng. Sci., 51(5), 826 (2011)
  11. Tokiwa Y, Calabia BP, Ugwu CU, Aiba S, Int. J. Mol. Sci., 10(9), 3722 (2009)
  12. Abdul Khalil HPS, Davoudpour Y, Islam MN, Mustapha A, Sudesh A, Dungani R, Jawaid M, Carbohydr. Polym., 99, 649 (2014)
  13. Huber T, Mussig J, Curnow O, Pang SS, Bickerton S, Staiger MP, J. Mater. Sci., 47(3), 1171 (2012)
  14. Jonas R, Farah LF, Polym. Degrad. Stabil., 59, 101 (1998)
  15. Darder M, Aranda P, Ruiz-Hitzky E, Adv. Mater., 19(10), 1309 (2007)
  16. Eichhorn SJ, Dufresne A, Aranguren M, Marcovich NE, Capadona JR, Rowan SJ, Weder C, Thielemans W, Roman M, Renneckar S, Gindl W, Veigel S, Keckes J, Yano H, Abe K, Nogi M, Nakagaito AN, Mangalam A, Simonsen J, Benight AS, Bismarck A, Berglund LA, Peijs T, J. Mater. Sci., 45(1), 1 (2010)
  17. Kester JJ, Fennema OR, Edible films and coatings: a review, Food Technol., 1986.
  18. Pareta R, Edirisinghe MJ, Carbohydr. Polym., 63, 425 (2006)
  19. Amagliani L, O’Regan J, Kelly AL, O’Mahony JA, J. Cereal. Sci., 70, 291 (2016)
  20. Angellier H, Molina-Boisseau S, Dole P, Dufresne A, Biomacromolecules, 7(2), 531 (2006)
  21. Zhang S, Feng X, Zhu S, Huan Q, Han K, Ma Y, Yu M, Mater. Lett., 98, 238 (2013)
  22. Akrami M, Ghasemi I, Azizi H, Karrabi M, Seyedabadi M, Carbohydr. Polym., 144, 254 (2016)
  23. Mano JF, Koniarova D, Reis RL, J. Mater. Sci. -Mater. Med., 14, 127 (2003)
  24. Ha CS, Cho WJ, Prog. Polym. Sci, 27, 759 (2002)
  25. Santulli C, in Advanced High Strength Natural Fibre Composites in Construction, Elsevier; pp.459 2017.
  26. Chiou BS, Yee E, Glenn GM, Orts WJ, Carbohydr. Polym., 59, 467 (2005)
  27. Liu H, Xie F, Yu L, Chen L, Li L, Prog. Polym. Sci, 34, 1348 (2009)
  28. Ghaffar SH, Fan MZ, Biomass Bioenerg., 57, 264 (2013)
  29. Duval A, Lawoko M, React. Funct. Polym., 85, 78 (2014)
  30. Norgren M, Edlund H, Curr. Opin. Colloid Interface Sci., 19, 409 (2014)
  31. Ragauskas AJ, Beckham GT, Biddy MJ, Chandra R, Chen F, et al., Science, 344, 124684 (2014)
  32. Kun D, Pukanszky B, Eur. Polym. J., 93, 618 (2017)
  33. Stewart D, Ind. Crop. Prod., 27, 202 (2008)
  34. Ghaffar SH, Fan M, Int. J. Adhes. Adhes., 48, 92 (2014)
  35. Chung YL, Olsson JV, Li RJ, Frank CW, Waymouth RM, Billington SL, Sattely ES, ACS Sustain. Chem. Eng., 1, 1231 (2013)
  36. Zhang C, Garrison TF, Madbouly SA, Kessler MR, Prog. Polym. Sci, 71, 91 (2017)
  37. Guner FS, Yagci Y, Erciyes AT, Prog. Polym. Sci, 31, 633 (2006)
  38. Sharma V, Kundu PP, Prog. Polym. Sci, 31, 983 (2006)
  39. De Espinosa LM, Meier MAR, Eur. Polym. J., 47, 837 (2011)
  40. Wik VM, Aranguren MI, Mosiewicki MA, Polym. Eng. Sci., 51(7), 1389 (2011)
  41. Liu ZS, Erhan SZ, Xu JY, Polymer, 46(23), 10119 (2005)
  42. Desroches M, Escouvois M, Auvergne R, Caillol S, Boutevin B, Polym. Rev., 52, 38 (2012)
  43. Datta J, Glowinska E, J. Elastomer Plast., 46, 33 (2014)
  44. Stempfle F, Quinzler D, Heckler I, Mecking S, Macromolecules, 44(11), 4159 (2011)
  45. Pardal F, Salhi S, Rousseau B, Tessier M, Claude S, Fradet A, Macromol. Chem. Phys., 209, 64 (2008)
  46. Stempfle F, Ortmann P, Mecking S, Macromol. Rapid Commun., 34(1), 47 (2013)
  47. Visakh PM, Morlanes MJM, Polyethylene-Based Blends, Composites and Nanocomposities, John Wiley & Sons, Inc., 2015.
  48. Suriyamongkol P, Weselake R, Narine S, Moloney M, Shah S, Biotechnol. Adv., 25, 148 (2007)
  49. Luengo JM, Garcia B, Sandoval A, Naharro G, Olivera ER, Curr. Opin. Microbiol., 6, 251 (2003)
  50. Page WJ, Manchak J, Rudy B, Appl. Environ. Microbiol., 58, 2866 (1999)
  51. Jiang YJ, Song X, Gong L, Li P, Dai CC, Shao WL, Enzyme Microb. Technol., 42(2), 167 (2008)
  52. Haas R, Jin B, Zepf FT, Biosci. Biotechnol. Biochem., 72, 253 (2014)
  53. Cavalheiro JMBT, de Almeida MCMD, Grandfils C, da Fonseca MMR, Process Biochem., 44(5), 509 (2009)
  54. Koller M, Bona R, Braunegg G, Hermann C, Horvat P, Kroutil M, Martinz J, Neto J, Pereira L, Varila P, Biomacromolecules, 6(2), 561 (2005)
  55. Ahn WS, Park SJ, Lee SY, Environ. Microbiol., 66, 3624 (2000)
  56. Kulpreecha S, Boonruangthavorn A, Meksiriporn B, Thongchul N, J. Biosci. Bioeng., 107(3), 240 (2009)
  57. Choi JI, Lee SY, Bioprocess Eng., 17, 335 (1997)
  58. Choi D, Chipman DC, Bents SC, Brown RC, Appl. Biochem. Biotechnol., 160(4), 1032 (2010)
  59. Bengtsson S, Pisco AR, Johansson P, Lemos PC, Reis MAM, J. Biotechnol., 147, 172 (2010)
  60. Khanna S, Srivastava AK, Process Biochem., 40(2), 607 (2005)
  61. Reddy CSK, Ghai R, Rashmi, Kalia VC, Bioresour. Technol., 87(2), 137 (2003)
  62. Van De Velde K, Kiekens P, Polym. Test, 21, 433 (2002)
  63. Avella M, Martuscelli E, Raimo M, J. Mater. Sci., 35(3), 523 (2000)
  64. Zhao H, Cui Z, Wang X, Turng LS, Peng X, Compos. Part B: Eng., 51, 79 (2013)
  65. Ummartyotin S, Manuspiya H, Renew. Sust. Energ. Rev., 41, 402 (2015)
  66. Castro-Aguirre E, Iniguez-Franco F, Samsudin H, Fang X, Auras R, Adv. Drug Deliv. Rev., 107, 333 (2016)
  67. Wang Y, Weng Y, Wang L, Polym. Test, 36, 119 (2014)
  68. Nofar M, Tabatabaei A, Sojoudiasli H, Park CB, Carreau PJ, Heuzey MC, Kamal MR, Eur. Polym. J., 90, 231 (2017)
  69. Prashanth KVH, Tharanathan RN, Trends Food Sci. Technol., 18, 117 (2007)
  70. Pillai CKS, Paul W, Sharma CP, Prog. Polym. Sci, 34, 641 (2009)
  71. Kurita K, Mar. Biotechnol., 8, 203 (2006)
  72. Julkapli NM, Akil HM, Ahmad Z, Compos. Interfaces, 18(6), 449 (2011)
  73. Vollrath F, Porter D, Polymer, 50(24), 5623 (2009)
  74. Hardy JG, Romer LM, Scheibel TR, Polymer, 49(20), 4309 (2008)
  75. Eisoldt L, Smith A, Scheibel T, Mater. Today, 14, 80 (2011)
  76. Blackledge TA, J. Arachnol., 40, 1 (2012)
  77. Sponner A, Entomol. Res., 37, 238 (2007)
  78. Hardy JG, Scheibel TR, Prog. Polym. Sci, 35, 1093 (2010)
  79. Dittenber DB, Gangarao HVS, Compos. Pt. A-Appl. Sci. Manuf., 43, 1419 (2012)
  80. Doherty W, Halley P, Edye L, Rogers D, Cardona F, Park Y, Woo T, Polym. Adv. Technol., 18, 673 (2007)
  81. Huda MS, Drzal LT, Misra M, Mohanty AK, J. Appl. Polym. Sci., 102(5), 4856 (2006)
  82. Avella M, Bogoeva-Gaceva G, Bularovska A, Errico ME, Gentile G, Grozdanov A, J. Appl. Polym. Sci., 108(6), 3542 (2008)
  83. Le Digabel F, Boquillon N, Dole P, Monties B, Averous L, J. Appl. Polym. Sci., 93(1), 428 (2004)
  84. Averous L, Le Digabel F, Carbohydr. Polym., 66, 480 (2006)
  85. Shibata M, Takachiyo KI, Ozawa K, Yosomiya R, Takeishi H, J. Appl. Polym. Sci., 85(1), 129 (2002)
  86. Nanda MR, Misra M, Mohanty AK, Macromol. Mater. Eng., 297, 184 (2012)
  87. Jiang L, Huang J, Qian J, Chen F, Zhang J, Wolcott MP, Zhu Y, J. Polym. Environ., 16, 83 (2008)
  88. Mohanty AK, Patnaik S, Singh BC, Misra M, J. Appl. Polym. Sci., 37, 117 (1989)
  89. Rosa MF, Chiou BS, Medeiros ES, Wood DF, Williams TG, Mattoso LHC, Orts WJ, Imam SH, Bioresour. Technol., 100(21), 5196 (2009)
  90. Khalil HPA, Ismail H, Polym. Test, 20, 65 (2000)
  91. Gardner DJ, Blumentritt M, Wang L, Yildirim N, Rev. Adhes. Adhes., 2, 127 (2014)
  92. Fuqua MA, Huo S, Ulven C A, Polym. Rev., 52, 259 (2012)
  93. Satyanarayana KG, Arizaga GGC, Wypych F, Prog. Polym. Sci, 34, 982 (2009)
  94. Karger-Kocsis J, Mahmood H, Pegoretti A, Prog. Mater. Sci., 73, 1 (2015)
  95. Graupner N, J. Mater. Sci., 43(15), 5222 (2008)
  96. Shumao L, Jie R, Hua Y, Tao Y, Weizhong Y, Polym. Int., 59, 242 (2010)
  97. Xiong R, Kim HS, Zhang S, Kim S, Korolovych VF, Ma R, Yingling YG, Lu C, Tsukruk VV, ACS Nano, 11, 12008 (2017)
  98. Xie Y, Hill CAS, Xiao Z, Militz H, Mai C, Compos. Part A: Appl. Sci. Manuf., 41, 806 (2010)
  99. Yang HS, Kim HJ, Park HJ, Lee BJ, Hwang TS, Compos. Struct., 77, 45 (2007)
  100. John MJ, Bellmann C, Anandjiwala RD, Carbohydr. Polym., 82, 549 (2010)
  101. Lee SH, Wang S, Compos. Part A: Appl. Sci. Manuf., 37, 80 (2006)
  102. Zhang J, Doll BA, Beckman EJ, Hollinger JO, J. Biomed. Mater. Res. A, 67, 389 (2003)
  103. Gurunathan T, Mohanty S, Nayak SK, Compos. Pt. A-Appl. Sci. Manuf., 77, 1 (2015)
  104. Lu JZ, Wu Q, McNabb HS, Wood Fiber Sci., 32, 88 (2000)
  105. Abdelmouleh M, Boufi S, Belgacem MN, Duarte AP, Salah AB, Gandini A, Int. J. Adhes. Adhes., 24, 43 (2004)
  106. Salon MCB, Abdelmouleh M, Boufi S, Belgacem MN, Gandini A, J. Colloid Interface Sci., 289(1), 249 (2005)
  107. Sis ALM, Ibrahim NA, Yunus WMZW, Iran. Polym. J. Engl. Ed., 22, 101 (2013)
  108. Huda MS, Drzal LT, Mohanty AK, Misra M, Compos. Sci. Technol., 68, 424 (2008)
  109. Sawpan MA, Pickering KL, Fernyhough A, Compos. Pt. A-Appl. Sci. Manuf., 42, 310 (2011)
  110. Shanks RA, Hodzic A, Wong S, J. Appl. Polym. Sci., 91(4), 2114 (2004)
  111. Bengtsson M, Oksman K, Compos. Sci. Technol., 66, 2177 (2006)
  112. Keener T, Stuart R, Brown T, Compos. Pt. A-Appl. Sci. Manuf., 35, 357 (2004)
  113. Issaadi K, Habi A, Grohens Y, Pillin I, Polym. Bull., 73(7), 2057 (2016)
  114. Petersson L, Oksman K, Mathew AP, J. Appl. Polym. Sci., 102(2), 1852 (2006)
  115. Zhang JF, Sun XZ, Biomacromolecules, 5(4), 1446 (2004)
  116. Hsu YC, Wu CS, Liao HT, Cai YX, J. Mater. Sci., 50(23), 7790 (2015)
  117. Hwang SW, Lee SB, Lee CK, Lee JY, Shim JK, Selke SEM, Soto-Valdez H, Matuana L, Rubino M, Auras R, Polym. Test, 31, 333 (2012)
  118. Chollakup R, Smitthipong W, Suwanruji P, in Natural Polymers:Composites, RSC Publishing, Cambridge, Chap. 8, p 161 2012.
  119. Huang J, Zhang L, Wei H, Cao XD, J. Appl. Polym. Sci., 93(2), 624 (2004)
  120. Wang H, Sun XZ, Seib P, J. Appl. Polym. Sci., 84(6), 1257 (2002)
  121. Grigoriou AH, Wood Sci. Technol., 37, 79 (2003)
  122. Girones J, Pimenta MTB, Vilaseca F, de Carvalho AJF, Mutje P, Curvelo AAS, Carbohydr. Polym., 68, 537 (2007)
  123. Ohkita T, Lee SH, J. Adhes. Sci. Technol., 18(8), 905 (2004)
  124. Singh S, Mohanty AK, Misra M, Compos. Pt. A-Appl. Sci. Manuf., 41, 304 (2010)
  125. Shah AUR, Prabhakar MN, Song JI, Int. J. Precis. Eng. Manuf. Green Technol., 4, 247 (2017)
  126. Kovacevic Z, Bischof S, Fan M, Compos. Part B: Eng., 78, 122 (2015)
  127. Awal A, Rana M, Sain M, Mech. Mater., 80, 87 (2015)
  128. Hassouna F, Raquez JM, Addiego F, Toniazzo V, Dubois P, Ruch D, Eur. Polym. J., 48, 404 (2012)
  129. Bibers I, Tupureina V, Dzene A, Kalnins M, Mech. Compos. Mater., 35, 357 (1999)
  130. Labrecque LV, Kumar RA, Dave V, Gross RA, Mccarthy SP, J. Appl. Polym. Sci., 66(8), 1507 (1997)
  131. Martin O, Averous L, Polymer, 42(14), 6209 (2001)
  132. Jacobsen S, Fritz HG, Polym. Eng. Sci., 36(22), 2799 (1996)
  133. Ibrahim NA, Yunus WMZW, Abdan MOK, Hadithon KA, J. Reinf. Plast. Compos., 29, 1099 (2010)
  134. Oksman K, Skrifvars M, Selin JF, Compos. Sci. Technol., 63, 1317 (2003)
  135. Sudesh K, Abe H, Doi Y, Prog. Polym. Sci, 25, 1503 (2000)
  136. Mngomezulu ME, John MJ, Jacobs V, Luyt AS, Carbohydr. Polym., 111, 149 (2014)
  137. Ryan CA, Billington SL, Criddle CS, J. Polym. Environ., 26, 1715 (2018)
  138. Wang L, Chen SS, Tsang DCW, Poon CS, Ok YS, Environ. Sci. Pollut. Res., 24, 12227 (2017)
  139. Prapruddivongs C, Sombatsompop N, Adv. Mater. Res., 747, 111 (2013)
  140. Prapruddivongs C, Sombatsompop N, Adv. Mater. Res., 410, 67 (2011)