The influence of solid particles size, density and loading on the critical gas-inducing impeller speed was investigated in a gas-liquid-solid stirring tank equipped with a hollow Rushton impeller. Three types of solid particles, hollow glass beads with diameters of 300 mu m, 200 mu m, 100 mu m, and 60 mu m, silica gel and desalting resin, were used. It was found that the adding solid particles would change the critical impeller speed. For hollow glass beads and silica gel, whose relative densities were less than or equal to 1.5, the critical impeller speeds increased with the solid loading before reaching the maximum values, and then decreased to a value even lower than that without added solids. The size of the solids also had apparent influence on the critical impeller speed, and larger solid particles correspond to a smaller critical impeller speed. The experimental data also showed that the gas-inducing was beneficial to the suspension of the solid particles. (C) 2018 The Chemical Industry and Engineering Society of China, and Chemical Industry Press. All rights reserved.