Axisymmetric simulations of a liquid rocket engine are performed using a delayed detached-eddy-simulation (DDES) turbulence model with the Compressible Flamelet Progress Variable (CFPV) combustion model. Three different pressure instability domains are simulated: completely unstable, semi-stable, and fully stable. The different instability domains are found by varying the combustion chamber and oxidizer post length. Laminar flamelet solutions with a detailed chemical mechanism are examined. The beta probability density function (PDF) for the mixture fraction and Dirac delta PDF for both the pressure and the progress variable are used. A coupling mechanism between the volumetric Heat Release Rate (HRR) and the pressure in an unstable cycle is demonstrated. Local extinction and reignition are investigated for all the instability domains using the full S-curve approach. A monotonic decrease in the amount of local extinctions and reignitions occurs when pressure oscillation amplitude becomes smaller. The flame index is used to distinguish between the premixed and non-premixed burning mode in different stability domains. An additional simulation of the unstable pressure oscillation case using only the stable flamelet burning branch of the S-curve is performed. Better agreement with experiments in terms of pressure oscillation amplitude is found when the full S-curve is used. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.