Artificial ground freezing (AGF) system is a temporary excavation -support method that is used in underground mines and tunneling projects to improve and stabilize ground structure, and to control groundwater seepage. The conjugate heat transfer between the bayonet freeze pipes and the ground plays a vital role in determining ice wall formation, heat extraction rate and closure time. In this study, a controlled laboratory scale AGF experimental rig is conceived and developed at Mine Multiphysics laboratory, McGill University. It is equipped with more than 80 temperature readings, thorough properties characterization, and an advanced instrumentation system to quantify the conjugate heat transfer process. We also developed a three-dimensional conjugate mathematical and numerical model of the bayonet freeze pipes and porous ground structure using enthalpy-porosity method. The model is further validated against global heat balance and local temperature distributions from our experiments at various operating conditions. Good agreement between model predictions and experimental data was achieved with R-2 = 0.972. The results indicate that higher coolant Reynolds number gives rise to a higher Nusselt number and, thus, higher heat extraction rate which is mirrored by a shorter closure time. Coolant Reynolds number is found to have a higher effect on the heat transfer performance as compared to coolant temperature and grounds initial temperature. Finally, the model is a reliable tool that can be extended and employed for design and optimization of industrial AGF system. Crown Copyright (C) 2018 Published by Elsevier Ltd. All rights reserved.