The efficiency of the degree of cooling and shear-induced crystallization on the formation of different crystal polymorphs and morphology development of isotactic polypropylene (iPP) and random propylene-ethylene copolymer was analysed in cast films. Wide-angle X-ray scattering was applied to evaluate the crystal structure formed in films solidified at different chill roll temperatures (15, 40, and 70 degrees C) and throughputs of the line (60 and 120 kg/h). The crystal geometry and morphology were visualized by atomic force microscopy. For films generated at 15 degrees C or at large supercooling together with the nodular domain additional grained round-shaped structures composed of mesophase were detected on the film surface. Increase of the chill roll temperature or lower supercooling allowed formation of the monoclinic phase of iPP. Higher drawing rate triggered crystal formation preferably on the surface of films quenched at 15 degrees C. The crystal structure and morphology were correlated to selected optical and mechanical properties. At close-to-identical crystallinity, the crystal aspect ratio and film roughness play a major role in controlling the film transparency and stiffness.