Production allocation refers to the practice of quantifying proportions of extracted commingled hydrocarbons across various contributing sources. In this paper we tested a new geochemical technique of trace element production allocation by analyzing the mass fractions of specific target elements in five end-member natural crude oils and the manually mixed crude oil in precisely controlled proportions. We analyzed target elements by ICP-OES and Triple Quadrupole (QQQ)-ICP-MS techniques in tandem on each sample. In our test, the contributing fractions of the five end-member oils were measured by weight and mixed in proportions of similar to 30%, 25%, 20%, 15%, and 10% in the commingled oil. The obtained mass fractions for specific target elements in both the five end-member oils and the commingled oil are input into a program developed called "ALLO-TRACE". ALLO-TRACE calculates the contributing fractions of all the end-member oils to the commingled oil using multiple analyte-based linear equations. Our repeated tests have shown that the calculated contribution fractions based on the mass fractions of multiple trace elements agree well with their known contribution fractions in the commingled oil. Accuracies of most calculations for all the five end-member oil target proportions are within 4%, and the best can be less than 0.6% for all end members (average 0.17% and median 0.1%). Most calculation uncertainties in terms of relative standard deviations of the five end-member oils are within 3%, and the best can be less than 2.3% for all end members (average 1.2% and median 0.9%).