Chalcopyrite nanoparticles (CuFeS2 NPs) with abundant surface bonded ferrous were successfully prepared, characterized and used as a catalyst for peroxymonosulfate (PMS) activation and BPA degradation. The effect of reaction parameters such as initial pH, catalyst load, PMS concentration, initial BPA concentration and reaction temperature on BPA degradation in CuFeS2-PMS system was systematically investigated. As a bimetallic sulfide, CuFeS2 exhibits ultra-high activity for PMS activation compared with Cu2S, FeS2, CuFeO2 and Co3O4. It was found that by co-use of 0.1 g L-1 CuFeS2 and 0.3 mmol L-1 PMS, 20 mg L-1 of BPA was almost completely degraded (99.7%) and reached a mineralization rate of 75% within 20 min. The highly catalytic activity of CuFeS2 is closely related to two aspects: one is that S2- in the catalysts promotes the cycling of Fe3+/Fe2+ and Cu2+/Cu+ cycles on the surface, and the other is the synergistic effect of Fe3+/Fe2+ and Cu2+ /Cu+ cycles in the PMS activation. These interesting findings shed some new insight on the development of metal sulfides for the oxidative treatment of organic contaminants.