Solvent-based post-combustion CO2 capture (PCC) provides a promising technology for the CO2 removal of coal-fired power plant (CFPP). However, there are strong interactions between the CFPP and the PCC system, which makes it challenging to attain a good control for the integrated plant. The PCC system requires extraction of large amounts of steam from the intermediate/low pressure steam turbine to provide heat for solvent regeneration, which will reduce power generation. Wide-range load variation of power plant will cause strong fluctuation of the flue gas flow and brings in a significant impact on the PCC system. To overcome these issues, this paper presents a reinforced coordinated control scheme for the integrated CFPP-PCC system based on the investigation of the overall plant dynamic behavior. Two model predictive controllers are developed for the CFPP and PCC plants respectively, in which the steam flow rate to re-boiler and the flue-gas flow rate are considered as feed-forward signals to link the two systems together. Three operating modes are considered for designing the coordinated control system, which are: (1) normal operating mode; (2) rapid power load change mode; and (3) strict carbon capture mode. The proposed coordinated controller can enhance the overall performance of the CFPP-PCC plant and achieve a flexible trade-off between power generation and CO2 reduction. Simulation results on a small-scale subcritical CFPP-PCC plant developed on gCCS demonstrates the effectiveness of the proposed controller.