Energy, Vol.175, 345-352, 2019
Corrosion performance of heat-resisting steels and alloys in supercritical carbon dioxide at 650 degrees C and 15 MPa
The corrosion behavior of martensitic heat-resistant steel T91, austenitic heat-resistant steel TP347HFG and nickel-based alloy 617 in high-temperature supercritical carbon dioxide at 650 degrees C and 15 MPa was investigated. Raman spectrum, X-ray diffraction, and glow-discharge optical emission spectrometry were employed to characterize the corrosion products. Results show that weight gain of T91 in supercritical carbon dioxide at 650 degrees C was significantly higher than that of TP347HFG and 617. The corrosion kinetics of investigated materials follow a sub-parabolic corrosion law. The chromia-rich oxide scales formed on TP347HFG and 617 enhanced their corrosion resistance, which was mainly attributed to higher Cr content in TP347HFG and 617. The internal oxidation rate of 617 was much more serious than the rate of carburization. Oxidation products on T91 consisted of Fe3O4 and (Fe,Cr)(3)O-4. Moreover, Cr-depletion and carburization zones were observed beneath the oxide scales. Based on the presence of Cr-depletion and carburization zones, it is proposed that corrosion resistance of heat-resistant steels and alloys in supercritical carbon dioxide can be evaluated by the corrosion degradation depth. (C) 2019 Elsevier Ltd. All rights reserved.