In this work, we demonstrate electrochemical methods for determination of porosity and surface area of thin films of interconnected nickel nanowires. While the standard porosimetry and gas adsorption methods lack sensitivity for characterization of thin metallic films, the electrochemical methods employing coulometry, cyclic voltammetry and electrochemical impedance spectroscopy can be applied to accurately determine textural properties of micron- and sub-micron thick nanostructured materials. Additionally, in this work we evaluated accuracy and precision of five electrochemical signals recorded during cyclic voltammetry and electrochemical impedance spectroscopy, which are commonly used for determination of electrochemical surface area (A(ECSA)) of various nickel electrodes. By verifying the data with two independent surface characterization techniques, we found that the analysis based on surface-limited oxidation of nickel and on capacitive charging of nickel surface during hydrogen evolution reaction give the best accuracy and smallest errors. We also show that experimental conditions play a crucial role in the accurate determination of AECSA of nickel nanomaterials. If the influence of experimental conditions is not corrected for, the electrochemical surface area can differ by over 250% compared to the surface area determined with other methods. (c) The Author(s) 2019. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited.