A mesh-type dimensionally stable anode (DSA) consisting of ruthenium and iridium with low catalyst loading was prepared as an oxygen evolution reaction catalyst in acidic and alkaline media. The electrodeposition (ED) conditions, i.e., applied current density and total cycle number, and ED solutions with different precursor ratios of ruthenium to iridium are examined to fabricate various DSAs with a uniform thickness, and the effect of the iridium content on the catalytic activity is investigated. Among various DSA electrodes, the DSA electrode without iridium exhibits the highest activity and stability in the acidic medium owing to the high ratio of ruthenium. Conversely, the DSA electrode obtained using the ED solution with the ratio of 8:2 exhibits the highest performance in the alkaline medium. This is because the DSA electrode without iridium showed low stability, which is attributed to the dissolution of ruthenium oxide in the alkaline medium. In addition, two large-scale DSA electrodes optimized in the acidic and alkaline electrolytes show excellent performance, indicating the feasibility of the application of this electrode in practical electrolysis. (C) 2019 Elsevier Ltd. All rights reserved.