Journal of Colloid and Interface Science, Vol.556, 239-248, 2019
Mixed-valent MnSiO3/C nanocomposite for high-performance asymmetric supercapacitor
In this work, carbon-coated manganese silicate (MnSiO3/C) nanocomposite with excellent cycling stability was fabricated via a cost-effective process. The carbon coating followed with a CO2 heat treatment process on the manganese silicate results in mixed-valent hierarchically-porous nanoparticles, which tightly connects with an ultrathin (similar to 1.5 nm) and ordered carbon coating layer. This composite features rectangular-like cyclic voltammetry curve with two couples of redox peaks, suppressing the irreversible reactions and thus providing a broad and stable working voltage. By fitting the CV curves, the MnSiO3/C demonstrates a capacitive energy-storage behavior. The as-assembled activated carboni/MnSiO3/C asymmetric supercapacitor in 1 M Na2SO4 aqueous electrolyte is found to have excellent cycling stability, with 95.5% retention of initial after 10,000 cycles. This device could deliver 25.8 W h kg(-1) energy density at the power density of 1 kW kg(-1) with similar to 10 mg cm(-2) high mass loading, suggesting a bright prospect in practical application. (C) 2019 Elsevier Inc. All rights reserved.
Keywords:Manganese silicate;Valence state;Cycling stability;Pseudocapacitive;Carbon coating;Hierarchical porous