화학공학소재연구정보센터
AIChE Journal, Vol.43, No.11, 3070-3084, 1997
Catalytic and Gas-Solid Reactions Involving HCN over Limestone
In coal-fired combustion systems solid calcium species may be present as ash components or limestone added to the combustion chamber. In this study heterogeneous reactions involving HCN over seven different limestones were investigated in a laboratory fixed-bed quartz reactor at 873-1,173 K. Calcined limestone is an effective catalyst for oxidation of HCN. Under conditions with complete conversion of HCN at O-2 concentrations above about 5,000 ppmv the selectivity for formation of NO and N2O is 50-70% and below 5%, respectively. Nitric oxide can be reduced by HCN to N-2 in the absence of O-2 and to N-2 and N2O in the presence of O-2. At low O-2 concentrations or low temperatures. HCN may react with CaO, forming calcium cyanamide, CaCN2. The selectivities for formation of NO and N2O from oxidation of CaCN2 is 20-25% for both species. The catalytic activity of limestone for oxidation of HCN decreases with increasing degree of sulfation. Simultaneously the selectivity for formation of NO decreases while that for N2O increases. The catalytic activity of sulfated limestone increases with decreasing SO2 concentration indicating a competition between SO2 and HCN for sites on the surface. The results indicate that heterogeneous oxidation of HCN is important in calciners and fluidized-bed combustors with limestone addition or when burning coals with an ash with a high catalytic activity.