Portable Fuel Containers (PFCs) made for consumer use can, under unusual circumstances, develop a flammable atmosphere in the container headspace. In order to prevent an inadvertent ignition from causing flame propagation into this headspace and a subsequent explosion or flame jetting, PFC manufacturers are developing prototype Flame Mitigation Devices (FMDs) for installation in the PFC. A test method is described in this paper to determine if the installed FMD will indeed prevent flame entry into the PFC in a high-challenge flame propagation scenario. The method entails the use of a butane-air mixture ignited in a 5 cm diameter, 12 cm long tube attached to either the container neck or a spout on the container neck. Two concept FMD designs have successfully prevented repeated attempts at flame propagation into the PFC and have also produced encouraging results in tests for fuel flow restriction, duel dispensing nozzle friction, and prolonged fuel exposure. Versions of these tests are currently being promulgated in a draft ASTM standard on PFC FMDs.