As Euler-Euler CFD simulations of bubbly flows suffer from uncertainties due to the many underpinning models, there is an obvious need of accurate experimental data for validation. With this in mind, a new bubbly flow test rig was built to be operated with and without liquid co-flow, with bubble size as uniform as possible in the range 4-7 mm, and with a very even horizontal bubble distribution. We designed the gas sparging system such that we can also produce an essentially bi-modal bubble size distribution. The column consists of two square sections to allow for studying the mixing of two originally separated bubbly flows with either the same or a different bubble size. The bubbles are produced from 2 x 196 needles, bubble sizes are determined with high-speed imaging and with a simple acoustical method, overall volume fractions in the column by means of air chamber pressure measurements. Overall volume fractions are presented as a function of gas and liquid flow rates, with slip velocity mostly increasing with increasing void fraction. First results are obtained on (a) producing bi-model bubble size distributions and the pertinent volume fractions in the column, and (b) flow patterns in the case of unequal aeration. (C) 2019 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.