Cellulose-derived nanographene oxide (nGO)-type carbon dot reinforced porous scaffolds of poly(epsilon-caprolactone) (PCL) were developed as templates from high internal phase emulsions (HIPE). The mechanical strength, structural integrity, and reusability of the scaffolds were enhanced via in situ cross-linking. An oil-in-oil (o/o) HIPE of epsilon-caprolactone monomer (CL) was made for this purpose, and the ring-opening polymerization of a continuous phase comprised of CL, catalyst (Sn(Oct)(2)), and cross-linker (bis(caprolactone-4-yl)) (BCY) was carried out. The functionalization of scaffolds with nGO was assessed along with its role as an effective Pickering stabilizer of the HIPEs. The pore size and porosity of the scaffolds were governed by HIPE morphology, which in turn was controlled by the amount of nGO and the volume fraction of the dispersed phase. The nGO-functionalized scaffolds of cross-linked PCL thus prepared were characterized for their morphological structure, mechanical strength, and oil sorption capacity. Enhanced oil adsorption of nGO-functionalized scaffolds proved them to be of higher potency compared to those made of neat PCL. Superior compressive strength and reusability of scaffolds for oil adsorption up to 40 times while maintaining the structural integrity for >= 25 sorption-desorption cycles added extra value to such scaffolds. The scaffolds also had excellent cell viability as evaluated by MG63 osteoblast-like cells and some bioactivity in the form of calcium phosphate mineralization on the surface of the scaffolds.