Microalgae are regarded as a promising feedstock for biofuels and value-added products but still suffer from an inefficient lipid extraction process. In the present study, a simple and energy-efficient extraction method is demonstrated to extract oil directly from the wet cake (260 g/L) of Nannochloropsis sp. with an assist from the high shear mixer (HSM). After the initial solvent screening, the composition of co-solvent and operating conditions were optimized according to lipid composition and extraction yield. The high shear-assisted extraction process was found to achieve 83% lipid extraction yield (94% for EPA) in 5 min and 95% yield (100% for EPA) in 30 min with minimal amounts of solvents (0.9 ml hexane, 0.39 ml ethanol, and 0.057 ml sulfuric acid for 1 g of wet cell) at 8000 rpm, 55 degrees C. In comparison with various two-step wet extraction methods, the HSM offers the most economical extraction in terms of specific energy consumption of 1.38 MJ/kg dry cell. Therefore, the HSM can be considered as an attractive alternative to conventional extraction methods, providing a new paradigm of wet extraction for microalgae. (C) 2019 Elsevier Ltd. All rights reserved.