We report synthesis of Copper Zinc Tin Sulfide (CZTS) thin films using sequential evaporation technique. The asdeposited films were subjected to various sulfurization temperatures ranging from 520 degrees C to 640 degrees C. This paper presents a detailed analysis of temperature dependent phase and defect formation in Cu-rich off-stoichiometric CZTS thin films. CZTS thin films moved from F-type to C-type with decreasing Cu/Zn disorder and defect concentration with increasing sulfurization temperature. The resulting films showed less off-stoichiometry in contrast to initial choice of intended off-stoichiometry exhibiting the structural flexibility within the compositional limits. Despite being off-stoichiometric, all the samples exhibited the tetragonal CZTS phase with preferred orientations. Raman analysis showed the disappearance and reappearance of secondary phases with increasing sulfurization temperature. EDS analysis suggested that composition of the films moved towards better stoichiometry till 580 degrees C before deteriorating again. Composition and lattice parameter values suggested Cu-rich offstoichiometric nature of sulfurized CZTS thin films. AFM study showed dependence of roughness with sulfurization temperature. Band gap was obtained in the range of 1.28 eV to 1.48 eV from UV-Vis spectroscopy measurement. PL analysis revealed the asymmetric shape and blue shift of the peaks. Band-to-tail recombination becomes pronounced with increase in sulfurization temperature. XPS analysis showed elements are in expected oxidation states.