대기압 플라즈마 용사 공정에서의 기판 코팅 온도 영향 연구

이기영; 오현철; Kiyoung Lee; Hyunchul Oh

Applied Chemistry for Engineering, Vol.31, No.6, 624-629, December, 2020

DOI10.14478/ace.2020.1071 Export Citation

대기압 플라즈마 용사 공정에서의 기판 코팅 온도 영향 연구

Measurement of the Coating Temperature Evolution during Atmospheric Plasma Spraying

이기영^{1, 2}, 오현철^{3, †}

¹경북대학교 미래과학기술융합학과
²경북대학교 나노소재공학부
³경남과학기술대학교 에너지공학과 미래융복합연구소

Kiyoung Lee^{1, 2}, and Hyunchul Oh^{3, †}

¹Department of Advanced Science and Technology Convergence, Kyungpook National University, Sangju 37224, Republic of Korea
²School of Nano & Materials Science and Engineering, Kyungpook National University, Sangju 37224, Republic of Korea
³Department of Energy Engineering, Future Convergence Technology Research Institute, Gyeongnam National University of Science and Technology (GNTECH), Jinju 52725, Republic of Korea

E-mail:

초록

대기 플라즈마 용사(APS)법을 이용한 지르코니아 열차폐 코팅의 보다 효과적인 온도 제어를 위해서는 기판 온도에 영향을 미치는 매개 변수에 대한 이해가 필수적이며 실험 데이터를 기반으로 한 더 많은 결과가 필요하다. 본 연구는 APS (atmospheric plasma sprayed) 공정에서 기판 온도 제어에 관한 연구를 목적으로 한다. 특히, APS 기판 코팅과정에서 기판 표면 온도 제어를 위한 공랭 시스템, 플라즈마 가스 흐름, 분말 공급 속도, 로봇 속도 및 기판소재 영향 등을 보고하고 있다. 이러한 체계적인 접근은 APS 방식의 표면 코딩에서 온도를 제어하는데 도움이 되며, 이는 코팅 품질의 향상으로 이어질 것이다.

For more effective temperature control of atmospheric plasma sprayed (APS) zirconia thermal barrier coating, understanding of the parameters, which influence the substrate temperature, is essential and also more numerical results based on the experimental data are required. This study aims to investigate the substrate temperature control during an APS process. The APS process deals with air-cooled systems, plasma-gas flow, powder feed rate, robot velocity, and substrate effect on the substrate surface temperature control during the process. This systematic approach will help to handle the temperature control, and thus lead to better coating quality.

Keywords:Thermal barrier coatings;Atmospheric plasma spray;Thermal spray processes

[References]

Pfender E, Plasma Chem. Plasma Process., 19(1), 1 (1999)
Vardelle A, Moreau C, Akedo J, Ashrafizadeh H, Berndt CC, et al., J. Therm. Spray Technol., 25, 1376 (2016)
Tucker RC, Thermal Spray Technology, 1st (Ed.), ASM Handbook, Volume 5A, OH, USA (2013).
Xie L, Chen D, Jordan EH, Ozturk A, Wu F, Ma X, Cetegen BM, Gell M, Surf. Coat. Technol., 201, 1058 (2006)
Samukawa S, Hori M, Rauf S, Tachibana K, Bruggeman P, et al., J. Phys. D-Appl. Phys., 45, 253001 (2012)
Fauchais P, Montavon G, Vardelle M, Cedelle J, Surf. Coat. Technol., 201, 1908 (2006)
Bach FW, Laarmann A, Wenz T, Modern Surf. Tech., 159-178 Wiley.VCH Verlag GmbH & Co. KGaA, Germany (2006).
Mauer G, Jarligo MO, Marcano D, Rezanka S, Zhou D, Vaßen R, IOP Conf. Series: Materials Sci. Eng., 181, 012001 (2017).
Zhao L, Seemann K, Fischer A, Lugscheider E, Surf. Coat. Technol., 168, 186 (2003)
Thirumalaikumarasamy D, Shanmugam K, Balasubramanian V, Prog. Natural Sci.: Materials Int., 22, 468 (2012)
Thirumalaikumarasamy D, Shanmugam K, Balasubramanian V, J. Magnesium Alloys, 2, 140 (2014)
Azarmi F, Coyle TW, Mostaghimi J, J. Thermal Spray Technol., 17, 144 (2008)
Bounazef M, Guessasma S, Montavon G, Coddet C, Mater. Lett., 58, 2451 (2004)
Soltani R, Heydarzadeh-Sohi M, Ansari M, Afsari F, Valefi Z, Surf. Coat. Technol., 321, 403 (2017)
Waki H, Kitamura T, Kobayashi A, J. Therm. Spray Technol., 18, 500 (2009)
Rico A, Rodriguez J, Otero E, Oxid. Met., 73, 531 (2010)
Lugscheider E, Barimani C, Eckert P, Eritt U, Comput. Mater. Sci., 7, 109 (1996)
Tejero-Martin D, Rad MR, McDonald A, Hussain T, J. Thermal Spray Technol., 28, 598 (2019)

[1] Pfender E, Plasma Chem. Plasma Process., 19(1), 1 (1999)

[2] Vardelle A, Moreau C, Akedo J, Ashrafizadeh H, Berndt CC, et al., J. Therm. Spray Technol., 25, 1376 (2016)

[3] Tucker RC, Thermal Spray Technology, 1st (Ed.), ASM Handbook, Volume 5A, OH, USA (2013).

[4] Xie L, Chen D, Jordan EH, Ozturk A, Wu F, Ma X, Cetegen BM, Gell M, Surf. Coat. Technol., 201, 1058 (2006)

[5] Samukawa S, Hori M, Rauf S, Tachibana K, Bruggeman P, et al., J. Phys. D-Appl. Phys., 45, 253001 (2012)

[6] Fauchais P, Montavon G, Vardelle M, Cedelle J, Surf. Coat. Technol., 201, 1908 (2006)

[7] Bach FW, Laarmann A, Wenz T, Modern Surf. Tech., 159-178 Wiley.VCH Verlag GmbH & Co. KGaA, Germany (2006).

[8] Mauer G, Jarligo MO, Marcano D, Rezanka S, Zhou D, Vaßen R, IOP Conf. Series: Materials Sci. Eng., 181, 012001 (2017).

[9] Zhao L, Seemann K, Fischer A, Lugscheider E, Surf. Coat. Technol., 168, 186 (2003)

[10] Thirumalaikumarasamy D, Shanmugam K, Balasubramanian V, Prog. Natural Sci.: Materials Int., 22, 468 (2012)

[11] Thirumalaikumarasamy D, Shanmugam K, Balasubramanian V, J. Magnesium Alloys, 2, 140 (2014)

[12] Azarmi F, Coyle TW, Mostaghimi J, J. Thermal Spray Technol., 17, 144 (2008)

[13] Bounazef M, Guessasma S, Montavon G, Coddet C, Mater. Lett., 58, 2451 (2004)

[14] Soltani R, Heydarzadeh-Sohi M, Ansari M, Afsari F, Valefi Z, Surf. Coat. Technol., 321, 403 (2017)

[15] Waki H, Kitamura T, Kobayashi A, J. Therm. Spray Technol., 18, 500 (2009)

[16] Rico A, Rodriguez J, Otero E, Oxid. Met., 73, 531 (2010)

[17] Lugscheider E, Barimani C, Eckert P, Eritt U, Comput. Mater. Sci., 7, 109 (1996)

[18] Tejero-Martin D, Rad MR, McDonald A, Hussain T, J. Thermal Spray Technol., 28, 598 (2019)