Sieve plate packing is a newly developed packing that has been used in several industries due to its simple structure and operating flexibility, and no liquid flooding. In this work, first, systematic experiments were conducted to measure the pressure drop of gas flow through six sieve plate packings. The results indicated that the geometric characteristics of the packing have complicated effects on the pressure drops. Based on this, CFD simulations on the gas flow field were conducted using the realizable k-epsilon model, and flow behaviours such as the pressure drop, pressure nephogram, and velocity distributions within different packings were obtained. The simulation results clearly showed interesting flow patterns, including the contraction and expansion of the gas stream through the sieve hole, the flow separation on the sharp edge of the hole, and the vortexes formed when gas impacts the downstream plate. By comparing the flow patterns and the pressure drop under different packings operating at different conditions, the effects of the geometric characteristics of the packing on the pressure drop could be clearly distinguished from the flow behaviours, so that the variations in pressure drop with various packing structures were clearly indicated. Finally, based on the experimental data and the simulated results, correlations for the prediction of the pressure drops were proposed. This work will provide a useful basis for understanding the flow behaviour of gas and liquid two-phase flow in sieve plate packing.