Journal of Vacuum Science & Technology B, Vol.16, No.3, 1110-1114, 1998
Metallization of Cu on polytetrafluoroethylene modified by keV Ar+ ion irradiation
A surface of polytetrafluoroethylene (PTFE) was modified with changing ion doses by 1 keV Ar+ ion irradiation and Cu films with a 5000 Angstrom were deposited on the modified PTFE. The scanning electron microscopy study showed that the surface texture of modified PTFE was in the form of filaments whose height increased depending on ion doses. Through x-ray photoelectron spectroscopy spectra, it was found that the intensity of F Is peaks decreased with ion doses by preferential sputtering of F atoms and the C-C and/or C-F chains were formed by the crosslinking in the newly unstable chains. Cu films were deposited uniformly along the filaments formed on the modified PTFE. In x-ray diffraction spectra of deposited Cu films on modified PTFE, a preferred orientation along (111) and (200) planes was found and a relative intensity of (111)/(200) orientation increased as surface roughness of modified PTFE increased. The resistivity of Cu films was changed from 2.7 mu Omega cm of unmodified PTFE to 4.3 mu Omega cm of modified PTFE at an ion dose of 1 x 10(16)/cm(2) and the abrupt increase of resistivity in the modified PTFE at an ion dose of 1 x 10(17)/cm(2) was due to being cut off the film which resulted from the increased surface roughness.