The shear-induced flocculation of kaolin-polymer flocs in a stirred tank is investigated at medium to high solids concentrations (phi = 1 - 10% w/w). The evolution of the average floc size is monitored by the change in intensity of laser light scattered in the 180 degrees direction. The measurements reflect the change in particle number concentration as flocculation proceeds. As flocculation begins, coagulation dominates and the flee size increases (total particle number decreases) and then levels off at a steady state value as fragmentation becomes significant and balances coagulation. At steady state, the measurements indicate the extent of flocculation. Increasing the shear rate increases the coagulation and fragmentation rates, resulting in smaller flee sizes at steady state. Increasing the flocculant concentration increases the steady state flee size by strengthening the bonds between primary particles to resist fragmentation. At constant shear rate and flocculant concentration, increasing the solids fraction decreases the steady state flee size indicating formation of weakly bonded flocs. Flocculant mixing was the most important factor for flocculation efficiency at high solids concentrations.