This paper deals with the kinetic study of bulk free radical polymerization of styrene initiated with the commercial bifunctional initiator 2,5-dimethyl-2,5-bis(2-ethyl hexanoyl peroxy)hexane (Lupersol 256). The polymerization kinetics is investigated by DSC measurement for temperatures between 80 and 110 degrees C and for initiator initial concentration from 0.115 up to 0.46 mol%. The experimental conversion and reaction rate are compared and discussed with the calculated values. For modeling the polymerization rate, a reaction scheme similar to the one given by Yoon and Choi (Polymer 1992;33(21):4582-4591) has been used and adapted. A detailed diffusional and semi-empirical model proposed by Chin et al. (Macromolecules 1983;16(3):348-357) has been modified by Rouge (Etude de la polymerisation radicalaire du styrene initiee par un amorceur bifonctionnel dans un reacteur tubulaire a recyclage, Diploma work, DC, EPF, Lausanne, 1997) in order to describe these results. The model allows the description of the number molecular weight, but the polydispersity is underestimated for conversion higher than 70%. For temperature higher than 100 degrees C, thermal initiation must be taken into account. The efficiency factor is found close to 1, but seems to decrease for temperatures above 100 degrees C. (C) 2000 Elsevier Science Ltd. All rights reserved.