A continuous bioreactor packed with a fibrous matrix was set up. Cells of Peniococcus acidilactici PO2 were inoculated and MRS broth was fed gradually until cell growth and immobilization were achieved. Kinetics of fermentation and production of bacteriocin were investigated at dilution rates ranging from 0.63 day(-1) to 1.58 day(-1) and at pH values that varied between 4.0 and 5.5. A maximum bacteriocin activity of 6400 AU/ml was detected when the medium was fermented at dilution rates of at least 1.19 day(-1) and the pH controlled at 4.5. The maximum bacteriocin productivity was 1.0 x 10(7) AUl(-1) day(-1) at a dilution rate of 1.58 day-l and pH 4.5. At this high dilution rate, 1.21 g cells/l medium was produced, 95.9% of the glucose in MRS broth was utilized, and 15.1 g lactic acid/l accumulated in the bioreactor effluent. The bioreactor was operated continuously for 3 months without encountering any clogging, degeneration, or contamination problems, indicating good long-term stability of the bioreactor for bacteriocin production. About 94% of the cells in the bioreactor were immobilized, and the remainder were suspended in the medium. According to scanning electron microscopic observations, cell immobilization in the fibrous matrix was attained by natural attachment to fiber surfaces and entrapment in the void volume within the fibrous matrix. In conclusion, conditions for the optimum continuous production of pediocin were defined; this may facilitate the development of large-scale industrial processes for production of this bacteriocin.