Langmuir-Blodgett (LB) multilayers of arachidic acid (AA) and octadecylamine (ODA) were used as templates in order to produce cadmium sulfide (CdS) nanoparticle arrays. Both atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) were used to characterize the film. In the absence of ODA, the cadmium arachidate: trilayers were highly crystalline with a lattice constant of 0.42 nm. Upon reaction with hydrogen sulfide (H2S), an ordered array of CdS nanoparticles with a particle separation of 4.2 nm was imaged. The existence of CdS was also confirmed by XPS. No CdS nanoparticles were formed when ODA was used as the sole component. In the presence of ODA, the crystalline structure of the AA film was disturbed, resulted in randomly distributed particles. The average particle height was reduced from 4 to 1 nm when the amount of ODA was increased. It is concluded that there is a direct correlation between the ordering of the organic template and that of the nanoparticle array. There is also a correlation between the particle size and the ratio of AA and ODA. Mixed LB films are promising in synthesizing semiconducting nanoparticle arrays of limited particle sizes.