The possibility of using the multicompartment immobilized enzyme reactor (MIER) in presence of a charged substrate is here explored. Penicillin G acylase is used to convert penicillin G (a free acid, with a pK of 2.6) into two charged products: phenyl acetic acid (PAA, with a pK of 4.2) and 6-aminopenicillanic acid (6-APA, a zwitterion with a pi of 3.6). The enzyme is trapped by an isoelectric mechanism in a chamber of the electrolyzer delimited by a pi 5.0 and a p/9.0 amphoteric, isoelectric membranes. Under normal operating conditions (continuous substrate feeding in the presence of an electric field), only a low substrate conversion can be achieved, due to rapid electrophoretic transport of unreacted penicillin G out of the reaction chamber towards the anode. Excellent conversion rates (>96%) are obtained under a "doubly-discontinuous" operation mode: a time-lapse substrate feeding, accompanied by short times (4-8 min) of electric field interruption. The product of interest (6-APA, a precursor of semisynthetic penicillins), by virtue of its amphoteric nature, is trapped in a chamber delimited by a p/3.5 membrane and a p/5.5 membrane, adjacent to the reaction chamber on its anodic side. The other contaminant product (PAA) first accumulates in the same chamber and then progressively vacates it to collect in the anodic reservoir, leaving behind a pure 6-APA solution. In this operation mode, vanishing amounts of unreacted substrate (penicillin G) leave the reaction chamber to contaminate the adjacent, anodic chambers. A novel class of zwitterionic buffers is additionally reported, able to cover very thoroughly any pH value along the pH 3-10 interval: polymeric, zwitterionic buffers, synthesized with the principle of the Immobiline (acrylamido weak acids and bases) chemicals. Enhanced enzyme reactivity is found in this macromolecular buffers as compared to conventional ones.