In the pretreatment of feeds for catalytic cracking and for HDA, the primary objective is to reduce the amount of organic sulfur and nitrogen compounds in the feedstock [Catal. Rev. Sci. Eng. 36 (1994) 75] [1]. Organic nitrogen compounds have a significantly negative kinetic effect on hydrotreating reactions. The distribution of the organic nitrogen compounds in feed and hydrotreated products is discussed. Alkyl-substituted carbazoles are found to be the dominant and most refractive organic nitrogen compound in the feed. Our results show that indoles and quinolines are very reactive as compared with carbazoles. From the characterization of the pyrrole benzologues, it is concluded that the more the substituents,the lesser the reactivity. It is well known that conversion of organic sulfur occurs via two different mechanistic routes: the direct and the hydrogenation route [J. Catal. 61 (1981) 523; AIChE J. 27 (1981) 663; J. Catal. 97 (1986) 52; Catal. Today, in press; Polyhedron 16 (1997) 3213] [2-6]. The hydrogenation route converts the most refractive S-molecules and plays a very important role in the conversion of N-compounds. N-containing molecules often show a very low reactivity as compared with the analogous sulfur compounds. Several studies using model feedstocks show that nitrogen-containing molecules, and in particular, basic organic nitrogen compounds inhibit the HDS reaction [Appl. Catal. A 170 (1998) 1] [7]. In this study, real feed experiments have demonstrated that even though carbazoles are slow to react and are among the predominant N-compounds, it is the basic N-compounds that are the major inhibiting species in diesel fuels.