A multistep, surface-tailoring process of polymeric materials was developed with two consecutive plasma treatments and followed by derivatization reactions. In the first step, tetrafluoroethylene was plasma-polymerized, generating a highly crosslinked perfluoric surface layer. The next step introduced amine groups into the plasma polymer through exposure of the surface to plasma of ammonia. The reactive amine moieties were then used as anchoring sites for further derivatization. Finally, poly(ethylene glycol) chains were grafted onto the surface via a hexamethylene diisocyanate spacer. This method, aimed at the chemical modification of polymers for biomedical applications, was first demonstrated with poly(ethylene terephthalate) (PET) as a substrate in a previously published study (Cohn, D.; Stern, T. Macromolecules 2000, 33, 137). The aim of this study was to demonstrate the applicability of the method described previously to different polymers: poly(lactic acid), poly(ethylene) (PE), polystyrene (PST), poly(methyl methacrylate), a polybutadiene-based polyurethane (PEUOXAB-20), and Lycra. Fourier transform infrared (FTIR) spectroscopy was used to characterize the surface-modified substrates and the various control treatments. The results obtained were consistent with the derivatization scheme and in full agreement with the FTIR and ESCA results previously obtained for PET.