The turbulent flow of water in a cylindrical, baffled vessel with an axial flow hydrofoil impeller, either a Chemineer HE3 (CHE3) or a Prochem Maxflo T (PMT), has been studied using a laser Doppler anemometer. Using ensemble averaging, the mean axial and radial flow and the associated fluctuating components were obtained for the whole of the vessel; plus similar data for the tangential component close to the impeller. Assuming axial symmetry, now rates were calculated as were flow numbers and circulation now numbers. Power numbers were also determined. All the data obtained were used to compare the circulation efficiency of the two hydrofoils plus a pitched blade and a Rushton turbine. This comparison showed that the CHE3 required a power input of about 2/3 of that for the PMT and about 1/3 of that for the pitched blade and Rushton turbine to obtain the same axial-radial circulation in the tank.