The intrinsic rate of diffusion of soluble lignin from fibre walls to bulk liquor has never been determined previously because of experimental difficulties; for example, the diffusion rate determined in a stirred cell is affected by the mechanical action of stirring. In our work, the intrinsic rate of diffusion of lignin macromolecules from the fibre walls of a softwood kraft pulp was determined under alkaline conditions using a displacement cell which eliminated external heat and mass transfer resistances and pulp fibre disturbances. The effects of such experimental conditions as pulp bed height and liquid flow rate were studied. The diffusion rate can be described by a diffusion model for a hollow cylinder with a very wide range of diffusion coefficients. The diffusion rate increased with increasing pH. Our results provide a new understanding of the lignin diffusion process in fibre walls, which is affected by the size of lignin molecules and the pores, and by the electrostatic interactions between intrafibre pore walls and lignin.