An expanding thermal plasma created by a cascaded are is used to deposit surface textured ZnO films. Films have been deposited at 150-350 degreesC at a rate of typically 0.70 nm/s. They exhibit low resistivity (< 10(-3) Omega cm), high transmittance in the visible wavelength region(> 80%) and a rough surface texture. The crystallite size and surface roughness increase with increasing deposition temperature and flow of argon ions. At the same time columnar textured growth gets less pronounced, a change to granular growth is observed. First p-i-n a-Si:H solar cells deposited on this material with initial efficiencies approaching 10% have been realised.