Batch sorption experiments performed on Cr(VI) species sorption showed a significantly enhanced removal of inorganic hexavalent chromium anionic species from aqueous solution by montmorillonite clays modified with quaternary amine, hexadecyltrimethylammonium (HDTMA) bromide. Unmodified clay had no affinity for chromium(VI) species. The sorption of Cr(VI) species has been carried out as a function of pH, contact time, adsorbate concentration (4.14 x 10(-5) to 8.62 x 10(-3) M), and temperature (5-45 degrees C), The surfactant-modified clay surface was stable when exposed to extremes in pH, The optimum pH for maximum sorption of Cr(VI) species was found to be at pH 1 and was constant between pH 2 and pH 6. The sorption data obtained was well described by DKR and Langmuir sorption isotherms, Sorption energy (E) for (i) surfactant sorption by montmorillonite clay and (ii) sorption of chromium(VI) species by surfactant modified clay have been computed from the DKR equation. Sorption energy evaluated for the sorption of both surfactant and Cr(VI) species showed that an ion-exchange mechanism was operative, The mechanism of retention appears to be replacement of counterion of the surfactant by Cr(VI) anionic species. Adsorbent capacity for the sorption of Cr(VI) species has been evaluated from the Langmuir sorption isotherm data. Thermodynamic parameters (Delta H degrees, Delta S degrees and Delta G degrees) for surfactant sorption on montmorillonite clay and Cr(VI) sorption by modified clay have been evaluated. The specific rate constant for sorption of Cr(VI) species on modified montmorillonite was rapid during the first 10 min and equilibrium was found to be attained within 30 min. The sorption of Cr(VI) species onto modified montmorillonite clay followed first-order rate kinetics.