Nanowires. sandwiched nanoribbons, and nanotubes of SnO2 are synthesized using elevated temperature synthesis techniques. and their structures are characterized in detail by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). In addition to the normal rutile structured SnO2, it has been possible to form an orthorhombic superlattice-like structure in the present study. The orthorhombic structure can form in a thin nanowire, coexist with the normal rutile structured SnO2 in a sandwiched nanoribbon. or occur in the form of nanotubes. This result is distinct from that for bulk SnO2 where pressures in excess of 150 kbar are required to form the orthorhombic form. The orientation relationship between the orthorhombic SnO2 and the rutile structured SnO2 is determined to be [001](o) parallel to [10 (2) over bar](t) and (100)(o) parallel to (010)(t) for the nanowires and sandwiched nanoribbons. and [001](o) parallel to [(317) over bar](t) and (110)(o) parallel to (451)(t) for the nanotubes. Although the growth direction of the rutile structured SnO2 nanowires is along [101](t) two growth directions are found to occur in the nanostructures having the orthorhombic SnO2 structure. They are [010](o) for nanowires and [(1) over bar 10](o) for the sandwiched nanoribbons and nanotubes. The results in this study and the observation of orthorhombic SnO2 may result from the formation of the products in an oxygen deficient environment.