A theoretical model for the rate of oxidation of pentachlorophenol (PCP) catalyzed by horseradish peroxidase (HRP), was investigated to account for the influence of hydrogen peroxide (H2O2) concentration on the catalytic activity. To evaluate the maximum allowable H2O2 concentration, a relatively simple steady-state model was developed based on the Ping-Pong Bi-Bi mechanism considering the effect of excess H2O2. Several sets of experimental data obtained from batch reactions using an equimolar concentration of H2O2 and PCP were used to estimate the kinetic parameters by a nonlinear regression method. The model profiles acquired using the estimated parameters were in good agreement with experimental data at different initial enzyme and substrate concentrations. The best-fitted parameters were used to predict the initial rate of the enzyme reaction. The model prediction was coincident with the experimental results of other studies, indicating that the proposed model could be used for the optimization of reaction conditions. The maximum allowable H2O2 concentration to prevent H2O2 inhibition was calculated from the proposed model equation: [H2O2](0,max) = root (KmKi)-K-H2O2[PCP](0)/K-m(PCP)+[PCP](0). Using this equation, a curve depicting the non-inactivation zone for the two substrates (hydrogen peroxide and PCP) was plotted and it could be used for experimental design and optimal process operation. To minimize enzyme inactivation by H2O2, it was determined that the concentration of H2O2 should be lower than 2.78 mM, regardless of the stoichiometric ratio.