Polymer(Korea), Vol.26, No.3, 375-380, May, 2002
박리형 폴리이미드 나노복합재료 제조와 특성에 관한 연구
A Study on the Preparation of the Exfoliated Polyimide Nanocomposite and Its Characterization
E-mail:
초록
합성한 polyamic acid의 말단기인 anhydride기와 반응시키기 위하여 나트륨 몬모릴로나이트에 diamine (p-phenylenediamine, m-phenylenediamine, and n-hexamethylenediamine)을 삽입시켰다. 그리고 4,4'-oxydianilline : 1,2,4,5-benzene tetracarboxylic dianhydride의 몰비를 1.50 : 1.53으로 하여 말단기가 anhydride된 polyamic acid를 합성하였다. 이렇게 치환된 몬모릴로나이트를 말단기가 anhydride된 polyamic acid와 N-methyl-2-pyrrolidone용액에서 반응시켰다 (polyamic acid/clay nanocomposite). 이것을 열이미드화하여 polyimide/clay 나노복합재료를 제조하였다. XRD와 TEM으로 관찰한 결과 실리케이트 층이 단일층으로 폴리이미드 매트릭스에 잘 분산되어 있는 박리형 폴리이미드 나노복합재료가 제조되었음을 알 수 있었다. 이들의 기계적 특성을 관찰한 결과 박리형 폴리이미드 나노복합재료의 경우가 순수한 폴리이미드와 삽입형 폴리이미드 나노복합재료의 경우보다 우수함을 알 수 있었다.
Diamines (p-phenylenediamine, m-phenylenediamine, and n-hexamethylenediamine) were intercalated into sodium montmorillonite for the further reaction with the anhydride end groups of polyamic acid. The anhydride terminated polyamic acid was synthesized using a mole ratio of 4,4'-oxydianilline : 1,2,4,5-benzene tetracarboxylic dianhydride = 1.50:1.53. The modified montmorillonite was reacted with polyamic acid terminated with anhydride group in N-methyl-2-pyrrolidone (polyamic acid/clay nanocomposite). After imidization, thin films of the
polyimide/clay nanocomposite were prepared. From the results of XRD and TEM, we found that
mono layered silicates were dispersed in polyimide matrix and those resultants were exfoliated
nanocomposites. Mechanical properties of exfoliated polyimide nanocomposite were better than
both those of pure polyimide and those of intercalated polyimide nanocomposite.
Keywords:polyimide;polyamic acid;montmorillonite;intercalated;nanocomposite;exfoliated nanocomposite
- Ryu JG, Park GR, Lyu SG, Rhew JH, Sur GS, Polym.(Korea), 22(2), 328 (1998)
- Lyu SG, Park YH, Rhew JH, Sur GS, J. Inst. Ind. Technol., 26, 139 (1998)
- Choi HK, Park YH, Lyu SG, Kim BS, Sur GS, Polym.(Korea), 23(3), 456 (1999)
- Mathias LJ, Davis RD, Jarrett WL, Macromolecules, 32(23), 7958 (1999)
- Biswas M, Ray SS, Polymer, 39(25), 6423 (1998)
- Ke YC, Long CF, Qi ZN, J. Appl. Polym. Sci., 71(7), 1139 (1999)
- Pradas MM, Schaber G, Ribelles JL, Colomer FR, Macromolecules, 30(12), 3612 (1997)
- Wang Z, Pinnavaia TJ, Chem. Mater., 10, 3769 (1998)
- Sikka M, Cerini LN, Ghosh SS, Winey KI, J. Polym. Sci. B: Polym. Phys., 34(8), 1443 (1996)
- Choi HK, Park YH, Lyu SG, Kim BS, Sur GS, Polym.(Korea), 23(5), 724 (1999)
- Okada A, Kawasumi M, Usuki A, Kosima Y, Kurauchi T, Kamigaito O, Mater. Res. Soc. Symp. Proc., 171, 45 (1990)
- Okada A, Kawasumi M, Kurauchi T, Kamigaito O, Polym. Prepr., 28, 447 (1987)
- Lee CU, Bae KS, Choi HK, Lee JH, Sur GS, Polym.(Korea), 24(2), 228 (2000)