Water electrolysis was conducted in both alkaline (25 wt.% KOH, 2 wt.% KOH) and acid (0.1 N H2SO4) solutions for 8 s under microgravity environment realized in a drop shaft. The gas bubble formation of hydrogen and oxygen on platinum electrodes was observed by CCD camera. In alkaline solutions, a bubble froth layer grew on the electrode surface. Hydrogen bubble size was smaller than that of oxygen. The current density at constant potential decreased continually with time. In spite of the growth of a bubble froth layer on the electrode, the electrolysis never stopped, apparently because fresh electrolyte is supplied to the electrode surface by microconvection induced by the gas bubble evolution. In acid solution, hydrogen gas bubbles frequently coalesced on the cathode surface, yielding a larger average bubble than that of oxygen. The current density did not vary at constant potentials from -0.4 to -0.8 V versus reversible hydrogen electrode (RHE), because the effective electrode surface area was significantly reduced by the larger bubble size compared to alkaline electrolyte. The present experiments indicate that, especially in a microgravity environment, the bubble evolution behavior and the resultant current-potential curves are significantly influenced by the wettability of the electrode in contact with the electrolyte. (C) 2003 Elsevier Ltd. All rights reserved.